586-554-2000
Mon–Fri 6:30am–5pm · Sat 8am–3pm
586-554-2000
Mon–Fri 6:30am–5pm
The ILSCO SK-3/0 CU is a two-conductor copper split-bolt splicer specified for #2–3/0 AWG conductors. Its base is high-strength copper alloy, and its bolt, nut, spacer, and pressure bar are electro-tin plated. Manufacturer specifications list copper and Copperweld conductor pairings.
The ILSCO SK-3/0 CU is a two-conductor copper split-bolt splicer specified for #2–3/0 AWG conductors. Its base is high-strength copper alloy, and its bolt, nut, spacer, and pressure bar are electro-tin plated. Manufacturer specifications list copper and Copperweld conductor pairings.
The ILSCO SK-3/0 CU is a two-conductor copper split-bolt splicer specified for #2–3/0 AWG conductors. Its base is high-strength copper alloy, and its bolt, nut, spacer, and pressure bar are electro-tin plated. Manufacturer specifications list copper and Copperweld conductor pairings.
Product information and specifications for the selected item.
| Brand | ILSCO |
|---|---|
| MPN | SK-3/0 CU |
| SKU | SK-3/0 CU |
| Category | Terminals, Splices & Connectors |
| Wire Connector Type | Splicer |
|---|---|
| Minimum Wire Gauge | 4 |
| Color Family | Silver |
| Length (in.) | 1.299 |
| Wire Connector Type | Splicer |
|---|---|
| Minimum Wire Gauge | 4 |
| Circuit Suitability | Suitable for circuits rated 35 or less; proper high-voltage spacing and insulation techniques must be used. kV |
| CSA Mark | CSA mark 701570 |
| Base Material | High-strength copper alloy |
| Thread Construction | Precision-tooled threads |
| Aluminum Conductor Use | Consult the factory before use with aluminum conductors. |
| Anti-Oxidant Application | Apply anti-oxidant to stripped wire ends with a brush, forcing it into the strands. |
| Splice Installation | Insert wires through opposite sides to full clamp contact; hand-tighten the nut, then torque to the specified value. |
| UL Listing | UL Listed 460C |
| Permitted conductor combinations | Copper-to-copper, Copperweld-to-Copperweld, and copper-to-Copperweld |
| Torque Warning | Failure to achieve proper torque can cause connector and wire overheating. |
| Recommended Torque | 500 in-lb |
| Tap Installation | Remove the nut/pressure bar and spacer, position the connector over the main wire, reinstall the spacer and nut/pressure bar, then insert the tap to full clamp contact and torque. |
| UL / CULUS specification | UL 486A/B Listed |
| Conductor Cleaning | Clean the conductor surface with a wire brush or abrasive cloth. |
| CSA standards | C22.2 No. 65; C22.2 No. 188 |
| Copper Conductor Types | For solid, compact, compressed, and concentric copper conductors. |
| Spacer Position and Orientation | For SK models, clamp the additional spacer between the two wires with its radius side facing the nut/pressure bar. |
| RoHS | Compliant |
| Wire Stripping | On insulated wires, strip enough insulation for full clamping contact without overlap or nicking strands. |
| Temperature Rating | 90 °C |
| Conductor Material Pairings | Copper-to-copper, Copperweld-to-Copperweld, and copper-to-Copperweld. |
| Material | Copper |
| Supported conductor types | Solid and stranded |
| Color Family | Silver |
|---|---|
| Plating | Bolt, nut, spacer and pressure bar are electro-tin plated. |
| Height (in.) | 2 |
|---|---|
| Width (in.) | 1.133 |
| Length (in.) | 1.299 |
| Weight (lb.) | 0.1463 |
Added to cart