Skip to content
Polaris

Insulated Multi-Tap Connector, 6–3/0 AWG, Dual-Side Entry, Mountable

0 Reviews
SKU
IPLMD3/0-6

Polaris IPLMD3/0-6 is a mountable multi-tap connector for 6–3/0 AWG copper and/or aluminum conductors. It has dual-side entry and high-dielectric-strength plastisol insulation, with ratings of 600 V and 90°C conductor temperature.

  • 6–3/0 AWG Conductor Range
  • Copper and Aluminum Compatibility
  • 600 V, 90°C Ratings
  • Dual-Side Wire Entry
  • 1/4-In Bolt Mounting Ports
  • UL 486B Dry-Location Listing

Polaris IPLMD3/0-6 is a mountable multi-tap connector for 6–3/0 AWG copper and/or aluminum conductors. It has dual-side entry and high-dielectric-strength plastisol insulation, with ratings of 600 V and 90°C conductor temperature.

Product Overview

Polaris IPLMD3/0-6 is a mountable multi-tap connector for 6–3/0 AWG copper and/or aluminum conductors. It has dual-side entry and high-dielectric-strength plastisol insulation, with ratings of 600 V and 90°C conductor temperature.

  • 6–3/0 AWG Conductor Range
  • Copper and Aluminum Compatibility
  • 600 V, 90°C Ratings
  • Dual-Side Wire Entry
  • 1/4-In Bolt Mounting Ports
  • UL 486B Dry-Location Listing

Technical Specifications

Product information and specifications for the selected item.

SKU: IPLMD3/0-6

Product Information

BrandPolaris
MPNIPLMD3/0-6
SKUIPLMD3/0-6
UPC / GTIN662381932242
CategoryTerminals, Splices & Connectors

Key Specs

Wire Connector TypeSplicer
Minimum Wire Gauge6
Color FamilyBlack
Length (in.)6.21

Connector & Wire

Wire Connector TypeSplicer
Minimum Wire Gauge6
Covering requirementNo separate cover or taping needed
Insulation materialHigh-dielectric-strength plastisol
Maximum voltage600 V
Conductor temperature rating90 °C
Insulation resistanceAbrasion-, chemical-, and UV-resistant
Oxide inhibitorPre-filled with oxide inhibitor
Cold-temperature rating-45 °C
Pressure screw drive1/4-in internal hex pressure screw
Conductor compatibilityDual-rated for copper and/or aluminum cables
Wire-use restrictionNot for fine-stranded, flexible wire
Mounting interfaceInsulated mounting port at each end for a 1/4-in bolt
Maximum torque250 in./lbs.
Screw access capRemovable screw-access cap; replace when tightening is complete
Pressure screw typeInternal-hex pressure screw
Combustion behaviorWill not support combustion
Mounting applicationsDirect isolated mounting to a trough, panel, or wireway
Unused-entry closureRemovable access plugs close the entry port not being used
Rated voltage600 V
UL listingUL Listed 486B wire connector for dry locations
Location ratingDry location
Connector material6061-T6 aluminum alloy
Fine-stranded wire compatibilityNot for fine-stranded, flexible wire

Color & Finish

Color FamilyBlack

Dimensions & Weight

Height (in.)1.91
Width (in.)1.83
Length (in.)6.21
Weight (lb.)0.7
Hex/wrench size1/4 in
Mounting bolt size1/4 in

Product Documents

  • Insulated Mounted Dual Entry 3/0 Connector — IPLMD3/0 Series Drawing Drawing photometric Open / download file
  • POLARIS® Utility Catalog — Warranty Terms Warranty Open / download file
  • POLARIS™ Pre-Insulated Connectors — Multi-Conductor With Mounting Holes, Either Side Wire Entry Specifications Spec sheet Open / download file

Your cart

0 products 0 units

Your cart is empty.

Add products as you browse, then review them here.