Inventronics EUD-320S670DT 320W Programmable LED Driver
0 Reviews
SKU
EUD-320S670DT
The Inventronics EUD-320S670DT is a 320 W programmable constant-current LED driver with 24–68 VDC output, adjustable 469–6700 mA current (4690–6700 mA at full power), and 90–305 VAC or 127–300 VDC input. It supports 0–10 V, PWM, and three timer-dimming modes and is identified as IP67.
320 W driver rating
24–68 VDC output
469–6700 mA adjustable current
90–305 VAC / 127–300 VDC input
0–10 V, PWM, timer dimming
IP67 protection rating
The Inventronics EUD-320S670DT is a 320 W programmable constant-current LED driver with 24–68 VDC output, adjustable 469–6700 mA current (4690–6700 mA at full power), and 90–305 VAC or 127–300 VDC input. It supports 0–10 V, PWM, and three timer-dimming modes and is identified as IP67.
The Inventronics EUD-320S670DT is a 320 W programmable constant-current LED driver with 24–68 VDC output, adjustable 469–6700 mA current (4690–6700 mA at full power), and 90–305 VAC or 127–300 VDC input. It supports 0–10 V, PWM, and three timer-dimming modes and is identified as IP67.
320 W driver rating
24–68 VDC output
469–6700 mA adjustable current
90–305 VAC / 127–300 VDC input
0–10 V, PWM, timer dimming
IP67 protection rating
Technical Specifications
Product information and specifications for the selected item.
SKU: EUD-320S670DT
Product Information
Brand
Inventronics
MPN
EUD-320S670DT
SKU
EUD-320S670DT
Category
LED Drivers & Ballasts
Electrical
Wattage Range
320 W
Output regulation
Line: ±0.5%; load: ±1.5%
Auxiliary output
Always-on 12 VDC auxiliary output, 200 mA
Lead wire construction
Input: UL SJTW, 3×18 AWG; dimming: UL21996, 5×22 AWG; output: UL STW, 2×18 AWG
Output current ripple
Total: 5% Iomax typical, 10% maximum; below 200 Hz: 2% Iomax typical at full load.
Output current tolerance
−5% to +5% of Ioset at 100% load
Lead colors and polarity
AC/L black, AC/N white, GND green; output V+ red and V− blue
Typical power factor
0.99 at 120 Vac; 0.96 at 220 Vac
Standby power
≤0.5 W
Input frequency
47–63 Hz
Output fault protection behavior
Over-temperature protection reduces current until the condition clears; short-circuit protection auto-recovers; overvoltage protection limits output at no load.
Typical efficiency
93.5% typical
Input surge protection
Differential mode: 6; common mode: 10 kV
External thermal protection thresholds
R1: 7.81; R2: 4.16 kΩ
Compatibility & Operation
Product type
LED Drivers
Dimming connection restriction
Do not connect Dim− to output V− or V+.
Time-dimming profiles
Self Adapting-Midnight; Self Adapting-Percentage; Traditional Timer
Output lumen compensation
Can start LEDs at reduced current and gradually increase drive current to counter LED lumen degradation.
Programming power requirement
Driver need not be powered during programming.
Storage conditions
−40 to +85 °C; 5–95% RH
PWM input limits
200 Hz–3 kHz; 1–99% duty cycle
Dimming modes
0–10 V, PWM, and three timer-dimming modes
Safety operating case temperature
−40 to +89 °C
Certifications & Warranty
Ratings & Certificates
CULUS, Damp Location, ROHS
MTBF
237,000 hours
Lifetime
97,000 hours
Dimensions & Weight
Height (in.)
1.75
Width (in.)
3.86
Length (in.)
9.88
Weight (lb.)
4.13
Enclosure material
Metal case
Product Documents
Inventronics Limited Warranty (revised May 29, 2024, V2.0)
Warranty
Open / download file
Choosing and Configuring 0-10V/PWM/Timer Programmable Outdoor LED Drivers — Inventronics Design-in Guide, V1.2
Manual
Open / download file
Installation and Operation Manual of LED Driver (YFT-WI-QC-028, Rev. D), with Outdoor Moisture-Ingress Guidelines
Installation manual
Open / download file