Skip to content
IRWIN

IRWIN Impact Tapcon Installation Drill Bit, 5/32" × 5", for 3/16" Concrete Screws

0 Reviews
SKU
1870566

The IRWIN 1870566 Impact Tapcon Installation Drill Bit has a 5/32-in. diameter, 5-in. overall length and 1/4-in. quick-change shank for impact drivers. It is specified for 3/16-in. × 2-3/4-in. Tapcon screws and all-purpose masonry.

  • For 3/16-Inch × 2-3/4-Inch Tapcon Screws
  • 5/32-Inch Diameter, 5-Inch Overall Length
  • 1/4-Inch Quick-Change Shank
  • Built-In Hex Depth Stop
  • Pressed-Carbide Tip
  • One-Piece High-Torque Construction

The IRWIN 1870566 Impact Tapcon Installation Drill Bit has a 5/32-in. diameter, 5-in. overall length and 1/4-in. quick-change shank for impact drivers. It is specified for 3/16-in. × 2-3/4-in. Tapcon screws and all-purpose masonry.

Product Overview

The IRWIN 1870566 Impact Tapcon Installation Drill Bit has a 5/32-in. diameter, 5-in. overall length and 1/4-in. quick-change shank for impact drivers. It is specified for 3/16-in. × 2-3/4-in. Tapcon screws and all-purpose masonry.

  • For 3/16-Inch × 2-3/4-Inch Tapcon Screws
  • 5/32-Inch Diameter, 5-Inch Overall Length
  • 1/4-Inch Quick-Change Shank
  • Built-In Hex Depth Stop
  • Pressed-Carbide Tip
  • One-Piece High-Torque Construction

Technical Specifications

Product information and specifications for the selected item.

SKU: 1870566

Product Information

BrandIRWIN
MPN1870566
SKU1870566
UPC / GTIN042526914393
CategoryTools

Key Specs

Bundle/SingleSingle Product
Color FamilyBlack

Package & Appearance

Bundle/SingleSingle Product
Color FamilyBlack
Shank1/4 in. quick-change shank designed for impact drivers; reduces slipping in standard drill chucks
Applicable materialAll-purpose masonry
Tapcon screw size compatibilityDesigned for 3/16 in. x 2-3/4 in. Tapcon screws
Surface finishBlack oxide finish; resists corrosion
Body constructionOne-piece construction withstands higher torque loads than standard quick-change bits
ConstructionOne-piece construction designed to withstand higher torque loads than standard quick-change bits
Installation sleeve interfaceInstallation sleeve slides over the bit and engages the hex collar to drive hex- or Phillips-head fasteners
Tip materialPressed carbide
Depth stopBuilt-in hex collar acts as a stop for drilling the correct hole depth for Tapcon and other concrete screws
Shank and driver compatibility1/4-in quick-change shank; designed for impact drivers and reduces slipping in standard drill chucks

Dimensions & Weight

Length (in.)5
Weight (lb.)0.05
Flute length3-1/4 in.
Maximum drilling depth3-1/4 in

Product Documents

Your cart

0 products 0 units

Your cart is empty.

Add products as you browse, then review them here.