Skip to content
Kidde

Kidde P4010ACSCO-W Hardwired Combination Smoke & Carbon Monoxide Alarm with Wire-Free Interconnect

0 Reviews
SKU
P4010ACSCO-W

The Kidde P4010ACSCO-W is a UL Listed, 120 VAC hardwired combination smoke and carbon monoxide alarm. It uses photoelectric smoke and electrochemical CO sensing, with a sealed 3 V lithium backup requiring no replacement during its 10-year alarm life, supervised wire-free interconnect, and voice notifications.

  • Photoelectric Smoke and Electrochemical CO Sensors
  • 120 VAC, 60 Hz Hardwired Input
  • Supervised Wire-Free Interconnect
  • Sealed 3 V Lithium Backup
  • UL Listed
  • Voice Notifications

Product Overview

The Kidde P4010ACSCO-W is a UL Listed, 120 VAC hardwired combination smoke and carbon monoxide alarm. It uses photoelectric smoke and electrochemical CO sensing, with a sealed 3 V lithium backup requiring no replacement during its 10-year alarm life, supervised wire-free interconnect, and voice notifications.

Technical Specifications

Product information and specifications for the selected item.

SKU: P4010ACSCO-W

Product Information

BrandKidde
MPNP4010ACSCO-W
SKUP4010ACSCO-W
UPC / GTIN047871273232
CategorySafety Supplies

Key Specs

Safety FeaturesOther
Certifications and ListingsUL Listed
Bundle/SingleSingle Product

Safety & Compliance

Safety FeaturesOther
Certifications and ListingsUL Listed
CO alarm response times70 ppm: 60-240 min; 150 ppm: 10-50 min; 400 ppm: 4-15 min
Audio alarm level85 dB at 10 ft
Supply circuit requirementSingle-phase, non-switchable circuit; not protected by a ground fault interrupter
Interconnect device limitUp to 24 Kidde Safety devices; maximum 18 alarms total, including up to 12 smoke alarms
RF transmit power8 mW EIRP
Wi-Fi requirementNo home Wi-Fi required; wireless units create their own independent alarm network
Backup battery voltage3 V
Backup battery type and lifeSealed lithium; no replacement required over the 10-year alarm life
AC input rating120 VAC, 60 Hz, 53 mA max
Operating humidity range10 to 95 % RH, non-condensing
Alarm pulse frequency3.0 to 3.5 kHz
Intended installation environmentFor ordinary indoor family-living units; not for hazardous locations, RVs, or boats
Operating temperature range40 to 100 °F (4.4 to 37.8 °C)
Radio modulationFSK
Mounting box compatibilityStandard single-gang electrical box, up to a 4 in. octagon junction box
Electrical connectorPlug-in connector
Wireless interconnect range>300 ft in open air
Hardwire interconnect wiring requirementsInterconnect wiring must share the AC power raceway or cable; hardwired units must share a single circuit
Maximum hardwire interconnect run1,000 ft
Maximum interconnect wiring resistance10 Ω
Interconnect radio frequency range902-928 MHz
Inverter compatibilityNot operable from square-wave, modified square-wave, or modified sine-wave inverters
Sensor technologiesSmoke: photoelectric; CO: electrochemical
Antenna constructionIntegral antenna embedded on the PCB; not user-accessible or replaceable

Package & Appearance

Bundle/SingleSingle Product
Hardware Color FamilyWhite

Dimensions & Weight

Height (in.)5.59
Width (in.)5.59
Length (in.)1.91
Weight (lb.)0.6

Product Documents

Your cart

0 products 0 units

Your cart is empty.

Add products as you browse, then review them here.