Skip to content
King Electric

King Electric K Series 3ft Electric Baseboard Heater, 120V, 750W, Bright White

0 Reviews
SKU
3K1207BW

The King Electric K Series 3-foot surface-mount electric baseboard heater has a bright-white steel body and an aluminum ribbon-fin element. It is rated 120 V, 750 W, and 6.3 A, and requires a separate line-voltage thermostat.

  • 120 V / 750 W / 6.3 A Rating
  • 36-Inch Surface-Mount Dimensions
  • Steel Housing, Baked-Enamel Finish
  • Aluminum Ribbon-Fin Element
  • Full-Length Thermal Cutout
  • Separate Line-Voltage Thermostat

The King Electric K Series 3-foot surface-mount electric baseboard heater has a bright-white steel body and an aluminum ribbon-fin element. It is rated 120 V, 750 W, and 6.3 A, and requires a separate line-voltage thermostat.

Product Overview

The King Electric K Series 3-foot surface-mount electric baseboard heater has a bright-white steel body and an aluminum ribbon-fin element. It is rated 120 V, 750 W, and 6.3 A, and requires a separate line-voltage thermostat.

  • 120 V / 750 W / 6.3 A Rating
  • 36-Inch Surface-Mount Dimensions
  • Steel Housing, Baked-Enamel Finish
  • Aluminum Ribbon-Fin Element
  • Full-Length Thermal Cutout
  • Separate Line-Voltage Thermostat

Technical Specifications

Product information and specifications for the selected item.

SKU: 3K1207BW

Product Information

BrandKing Electric
MPN3K1207BW
SKU3K1207BW
UPC / GTIN093319113684
CategorySurface-Mount & Flush-Mount Fixtures

Key Specs

Location UseBedroom, Office
Fixture MaterialSteel

Fixture & Bulbs

Mounting methodSurface mount
Junction-box knockoutsFive 1/2-inch knockouts on the back, bottom, and side
Junction-box configuration44-cubic-inch junction box at both ends
Wiring accessCan be wired from either the left or right end
Thermostat requirementSeparate line-voltage thermostat required
PhaseSingle phase (1Ø)
Current draw6.3 A

Ratings & Use

Location UseBedroom, Office
Bathroom circuit protectionGFCI-protected branch circuit required for bathroom installation
Tub/shower restrictionDo not install in bathtub or shower areas
Safety listingcULus listed
Compliance listingcULus (E29778)

Materials & Finish

Fixture MaterialSteel
Fixture ColorWhite
Surface coatingBaked enamel
Heating-element construction80% nickel / 20% chromium corrosion-resistant wire, surrounded by magnesium oxide and enclosed in a rust-resistant sheath
Panel constructionFront, back, bottom, and top are 22-gauge, longitudinally ribbed and center-supported to resist impact
Fin attachmentRibbon aluminum finning is compression-welded to the sheathed element to form a chimney-type heat-transfer flue
Heating element materials80% nickel/20% chromium alloy wire, magnesium oxide insulation, and a rust-resistant sheath

Style & Features

IncludedInstallation Instructions
Thermal protectionContinuous capillary sensor spans the full element length; fail-safe type, rated 175 °F
Airflow pathIntake at the bottom (lower front); discharge through the top front

Dimensions & Weight

Height (in.)6.75
Width (in.)3.25
Length (in.)36
Weight (lb.)7
Minimum furniture clearance6 in

Product Documents

Your cart

1 product 1 unit