Skip to content
KOHLER

KOHLER RXT 100A Service-Entrance Automatic Transfer Switch, Single-Phase, 120/240V

0 Reviews
SKU
RXT-JFNC-100ASEQS4

The KOHLER RXT-JFNC-100ASEQS4 is a 100 A automatic transfer switch for 120/240 V single-phase systems, with a 2-pole, 3-wire solid neutral and service-entrance configuration. Its aluminum NEMA 3R enclosure is specified for indoor or outdoor use, and it is compatible with single-phase KOHLER generators using RDC2 or DC2 controllers.

  • 100 A Maximum Amperage
  • 120/240 V Single-Phase Configuration
  • KOHLER RDC2/DC2 Generator Compatibility
  • Service-Entrance Disconnect Breaker
  • NEMA 3R Aluminum Enclosure
  • Manages Up to Six Loads

Product Overview

The KOHLER RXT-JFNC-100ASEQS4 is a 100 A automatic transfer switch for 120/240 V single-phase systems, with a 2-pole, 3-wire solid neutral and service-entrance configuration. Its aluminum NEMA 3R enclosure is specified for indoor or outdoor use, and it is compatible with single-phase KOHLER generators using RDC2 or DC2 controllers.

Technical Specifications

Product information and specifications for the selected item.

SKU: RXT-JFNC-100ASEQS4

Product Information

BrandKOHLER
MPNRXT-JFNC-100ASEQS4
SKURXT-JFNC-100ASEQS4
UPC / GTIN650531378217
CategoryAutomatic Transfer Switches

Key Specs

Maximum Amperage (A)100
Automatic/ManualAutomatic
Certifications and ListingsUL Listed

Electrical Ratings

Maximum Amperage (A)100
Pole, wire, and neutral configuration2-pole, 3-wire, solid neutral (120/240 V only)
Service disconnect deviceCircuit breaker provides the utility (normal) source service disconnect
Rated voltage at 60 Hz240 V
PhaseSingle Phase
Pilot relay output rating125 VAC, 10 A total general-purpose; 120 VAC, 125 VA pilot-duty
Neutral bonding jumperShipped with neutral-to-ground bonding jumper installed
Neutral-to-ground jumperShipped with the neutral-to-ground jumper installed
Withstand/close-on fault-current rating at 240 VAC (WCR)22,000 A RMS symmetrical

Transfer & Features

Automatic/ManualAutomatic
Operating altitude without derating0 to 3050 (10,000) without derating m (ft)
Enclosure ratingNEMA 3R
Storage temperature range-40 to 85 °C
Operating humidity5% to 95%, noncondensing
Enclosure materialAluminum
Installation locationIndoor or outdoor
Operating temperature-20 to 70 (-4 to 158) °C (°F)
Manageable residential loadsUp to 6 total: 4 customer-supplied nonessential secondary loads and 2 independent HVAC loads
Generator compatibilityAll single-phase KOHLER generators with RDC2 or DC2 controllers
Engine-start control and terminalsEngine start is controlled by the generator-set controller; the ATS has no engine-start terminals
Relative humidity5 to 95, noncondensing % RH
External load panel requirementA separate load panel is required for models without a load center
Enclosure useIndoor or outdoor
Controller-interface communication cable20 AWG shielded, twisted-pair; Belden #9402, #8762, or equivalent recommended
Integrated load centerWithout a load center
Transfer transition type and frequencyStandard transition, 60 Hz

Certifications

Certifications and ListingsUL Listed

Dimensions & Weight

Height (in.)28.8
Width (in.)16.4
Length (in.)6.9
Weight (lb.)22

Product Documents

  • TP-7231 — Model RDT and RXT Transfer Switches, Five-Year Limited Warranty Warranty Open / download file
  • TP-7193 — Operation and Installation, Model RXT Automatic Transfer Switch, 100–400 Amps Installation manual Open / download file

Your cart

0 products 0 units

Your cart is empty.

Add products as you browse, then review them here.