Skip to content
Kohler

Kohler RXT 200A 2-Pole Service-Entrance Automatic Transfer Switch, 240V, NEMA 3R

0 Reviews
SKU
RXT-JFNC-200ASEQS4

The Kohler RXT-JFNC-200ASEQS4 is an automatic, 200 A, single-phase 240 V, service-entrance transfer switch with a 2-pole, 3-wire solid-neutral arrangement. It is non-fused, supplied without a load center, and housed in a corrosion-resistant aluminum NEMA 3R enclosure specified for indoor or outdoor locations. Generator compatibility is specified for Kohler generator sets equipped with RDC2 controls.

  • 200 A Switch Rating
  • Single-Phase 240 V
  • Service-Entrance Rated
  • 2-Pole, 3-Wire Solid Neutral
  • NEMA 3R Aluminum Enclosure
  • Kohler RDC2 Generator Compatibility

Product Overview

The Kohler RXT-JFNC-200ASEQS4 is an automatic, 200 A, single-phase 240 V, service-entrance transfer switch with a 2-pole, 3-wire solid-neutral arrangement. It is non-fused, supplied without a load center, and housed in a corrosion-resistant aluminum NEMA 3R enclosure specified for indoor or outdoor locations. Generator compatibility is specified for Kohler generator sets equipped with RDC2 controls.

Technical Specifications

Product information and specifications for the selected item.

SKU: RXT-JFNC-200ASEQS4

Product Information

BrandKohler
MPNRXT-JFNC-200ASEQS4
SKURXT-JFNC-200ASEQS4
CategoryAutomatic Transfer Switches

Key Specs

Maximum Amperage (A)200
FusedNon-Fused
Automatic/ManualAutomatic
Certifications and ListingsUL Listed

Electrical Ratings

Maximum Amperage (A)200
FusedNon-Fused
Neutral conductor range(5) #12–250 KCMIL Cu or (5) #10–250 KCMIL Al
Pole/wire/neutral arrangement2-pole, 3-wire, solid neutral
Emergency/load conductor range(1) #6–250 KCMIL per phase
Frequency60 Hz
Pole and wire configuration2-pole, 3-wire, solid neutral
Normal-source conductor range(1) #4–300 KCMIL per phase
Contactor terminal torque225 lbf-in
External power terminal typeAL/CU solderless screw-type external power terminals
Continuous-load current limit80% of switch rating
Withstand and close-on rating (WCR)22,000 A RMS symmetrical
PhaseSingle phase
Utility-disconnect breaker terminal torque250 lbf-in

Transfer & Features

Automatic/ManualAutomatic
FeaturesMountable, Overload Protection, Water Resistant
Transition typeStandard transition
Neutral-to-ground bonding jumperInstalled as shipped
Humidity range5% to 95% noncondensing
Operating temperature range-20 to 70 °C
Enclosure finishANSI 49 gray
Storage temperature range-40 to 85 °C
Operating altitude0 to 3050 without derating m
Installation locationIndoor or outdoor
Main contact materialSilver alloy
Load centerWithout load center
Enclosure materialCorrosion-resistant aluminum
Generator compatibilityKohler generator set equipped with an RDC2 controller

Certifications

Certifications and ListingsUL Listed

Dimensions & Weight

Height (in.)28.9
Width (in.)16.4
Length (in.)6.9
Weight (lb.)26

Product Documents

  • RXT ATS Dimensional Drawing, 100–200A Service Entrance NEMA 3R (ADV-9046) Drawing photometric Open / download file
  • Model RDT and RXT Transfer Switches — Five-Year Limited Warranty, United States (TP-7231, 12/24c) Warranty Open / download file
  • Kohler RXT Automatic Transfer Switches Service and Parts Manual (TP-6808, 12/18c) Manual Open / download file
  • Model RXT 100–400 Amp Automatic Transfer Switch — Operation and Installation (TP-7193, 4/26a) Installation manual Open / download file
  • Model RXT Automatic Transfer Switch, 100–400 Amps (G11-152, 4/21) Spec sheet Open / download file

Your cart

0 products 0 units

Your cart is empty.

Add products as you browse, then review them here.