Skip to content
Kohler

Kohler RXT 200A 277/480V 3-Phase Automatic Transfer Switch

0 Reviews
SKU
RXT-JMTC-0200A-QS3

The Kohler RXT-JMTC-0200A-QS3 is an automatic, standard-transition transfer switch rated at 200 A for 277/480 V three-phase service. It uses a 3-pole, 4-wire solid-neutral configuration, has no load center, and is housed in a corrosion-resistant aluminum NEMA 3R enclosure approved for indoor or outdoor installation.

  • 200 A Maximum Amperage
  • 277/480 V Three-Phase Rating
  • 3-Pole, 4-Wire Solid Neutral
  • NEMA 3R Aluminum Enclosure
  • No Load Center
  • RDC2 Controller Compatibility

Product Overview

The Kohler RXT-JMTC-0200A-QS3 is an automatic, standard-transition transfer switch rated at 200 A for 277/480 V three-phase service. It uses a 3-pole, 4-wire solid-neutral configuration, has no load center, and is housed in a corrosion-resistant aluminum NEMA 3R enclosure approved for indoor or outdoor installation.

Technical Specifications

Product information and specifications for the selected item.

SKU: RXT-JMTC-0200A-QS3

Product Information

BrandKohler
MPNRXT-JMTC-0200A-QS3
SKURXT-JMTC-0200A-QS3
CategoryAutomatic Transfer Switches

Key Specs

Maximum Amperage (A)200
Automatic/ManualAutomatic
Certifications and ListingsUL Listed

Electrical Ratings

Maximum Amperage (A)200
Frequency60 Hz
Altitude range without derating0 to 10,000 without derating ft
Auxiliary position-indicating contactsStandard; 15 A at 250 VAC
Neutral conductor size3 conductors, #14–1/0 AWG
Normal and emergency/load conductor size1 conductor per phase, #14–4/0 AWG
External power conductor rangeOne #14 to 4/0 AWG conductor per phase
Withstand-and-close-on rating (WCR)10,000 A RMS symmetrical

Transfer & Features

Automatic/ManualAutomatic
FeaturesMountable, Water Resistant
Load-control connection wire size#12–18 AWG
Enclosure finishANSI 49 gray
Installation locationApproved for indoor or outdoor installation
Main contact materialSilver alloy
Controller PWR/COM wire size#12–20 AWG
Load-center configurationNo load center (connection code A)
Transfer transitionStandard transition
Humidity range5 to 95, noncondensing % RH
Transition type and frequencyStandard-transition, 60 Hz
Generator-set controller compatibilityFor Kohler generator sets equipped with the RDC2 generator set/transfer switch controller
External power terminal typeSolderless screw-type terminals for aluminum and copper power conductors
Required generator controllerKohler generator sets equipped with an RDC2 or DC2 controller
Operating temperature range-4 to 158 °F
Storage temperature range-40 to 185 °F
Enclosure materialCorrosion-resistant aluminum
Load-control contact delay after transfer to emergency source5 min
Controller A/B communication cable#20 AWG shielded twisted pair; Belden 9402, 8762, or equivalent

Certifications

Certifications and ListingsUL Listed

Dimensions & Weight

Height (in.)26.8
Width (in.)18.2
Length (in.)9
Weight (lb.)30

Product Documents

  • Diagram Electrical, 100–200A RXT 3PH (GM115965) Drawing photometric Open / download file
  • Model RXT 100–200A, 3-Phase Standard Transition, Type 3R Enclosure — Dimension Print ADV-9755 Drawing photometric Open / download file
  • Model RDT and RXT Transfer Switches — Five-Year Limited Warranty, United States (TP-7231, 12/24c) Warranty Open / download file
  • Operation and Installation — Automatic Transfer Switch, Model RXT, 100–400 Amp Switches (TP-7193, 4/21) Installation manual Open / download file
  • Model RXT Automatic Transfer Switch, 100–400 Amps (G11-152) Spec sheet Open / download file

Your cart

0 products 0 units

Your cart is empty.

Add products as you browse, then review them here.