Skip to content
Kraloy

Kraloy 1-1/2" PVC Conduit Expansion Joint, 4" Travel

0 Reviews
SKU
PEJ150

Kraloy PEJ150 is a 1-1/2-inch PVC expansion conduit fitting with 4 inches of travel to accommodate conduit length changes caused by temperature variation. Its telescoping two-tube design is pre-lubricated, includes O-rings to prevent leakage, and can be installed vertically or horizontally. Kraloy guidance calls for expansion joints when temperature changes exceed 25°F.

  • 1-1/2-Inch PVC Fitting
  • 4-Inch Travel
  • Thermal Length-Change Compensation
  • Telescoping Two-Tube Design
  • O-Rings Included
  • Vertical or Horizontal Installation

Kraloy PEJ150 is a 1-1/2-inch PVC expansion conduit fitting with 4 inches of travel to accommodate conduit length changes caused by temperature variation. Its telescoping two-tube design is pre-lubricated, includes O-rings to prevent leakage, and can be installed vertically or horizontally. Kraloy guidance calls for expansion joints when temperature changes exceed 25°F.

Product Overview

Kraloy PEJ150 is a 1-1/2-inch PVC expansion conduit fitting with 4 inches of travel to accommodate conduit length changes caused by temperature variation. Its telescoping two-tube design is pre-lubricated, includes O-rings to prevent leakage, and can be installed vertically or horizontally. Kraloy guidance calls for expansion joints when temperature changes exceed 25°F.

  • 1-1/2-Inch PVC Fitting
  • 4-Inch Travel
  • Thermal Length-Change Compensation
  • Telescoping Two-Tube Design
  • O-Rings Included
  • Vertical or Horizontal Installation

Technical Specifications

Product information and specifications for the selected item.

SKU: PEJ150

Product Information

BrandKraloy
SKUPEJ150
CategoryConduit Fittings

Technical Details

Fitting TypeCoupling
Conduit CompatibilityPVC
Trade Size (in.)1-1/2 in
MaterialPVC
Height (in.)2.23
Width (in.)2.23
Length (in.)13
Weight (lb.)0.9

Sealing

Leakage protectionO-rings are included to prevent leakage.

Compliance

Certification markingsCSA and UL marks shown on the drawing
Certification marksCSA and UL certification marks are shown on the expansion-joint specification sheet.

Installation

Piston alignmentMisalignment can cause the piston to bind.
Strap placementPlace straps approximately one foot on either side of the joint
Vertical mounting detailFor vertical installation, mount the piston downward to limit dirt accumulation between the barrel and piston.
Vertical orientationMount the piston downward in vertical installations to prevent dirt buildup at the muzzle
Support arrangementClamp the barrel tight while leaving the conduit loose enough in its hangers to move
Piston settingDetermine the piston setting based on installation temperature to allow for both expansion and contraction
Mounting orientationCan be installed vertically or horizontally.
AlignmentKeep piston travel straight in the barrel to prevent binding

Construction

ConstructionTwo-tube construction, with one tube telescoping inside the other.
LubricationPre-lubricated for smooth adjustment.
Seal componentsO-rings
Sliding constructionTwo tubes, one telescoping inside the other

Mechanical

Travel4 in

Application

Thermal movement functionCompensates for conduit length changes caused by temperature variations.

Operating Conditions

Temperature-change thresholdExpansion joints are required when temperature change exceeds 25°F (14°C).
Application thresholdUse an expansion joint when expected temperature variation exceeds 25 °F

Product Documents

Your cart

0 products 0 units

Your cart is empty.

Add products as you browse, then review them here.