Skip to content
Kraloy

Kraloy 1-1/4" PVC Type LB Access Fitting

0 Reviews
SKU
LB125

Kraloy LB125 is a 1-1/4-in trade-size Type LB conduit body for PVC conduit, made of high-impact, nonconductive PVC. It provides access for cable pulling where conduit changes direction 90 degrees from a rear access point and is factory assembled with a PVC cover and gasket, threaded brass inserts, and brass screws.

  • 1-1/4-Inch PVC Trade Size
  • Type LB Cable-Pull Access
  • High-Impact Nonconductive PVC
  • CSA-Certified and UL-Listed
  • Factory-Assembled PVC Cover and Brass Hardware
  • Kraloy Solvent-Cement Joining

Kraloy LB125 is a 1-1/4-in trade-size Type LB conduit body for PVC conduit, made of high-impact, nonconductive PVC. It provides access for cable pulling where conduit changes direction 90 degrees from a rear access point and is factory assembled with a PVC cover and gasket, threaded brass inserts, and brass screws.

Product Overview

Kraloy LB125 is a 1-1/4-in trade-size Type LB conduit body for PVC conduit, made of high-impact, nonconductive PVC. It provides access for cable pulling where conduit changes direction 90 degrees from a rear access point and is factory assembled with a PVC cover and gasket, threaded brass inserts, and brass screws.

  • 1-1/4-Inch PVC Trade Size
  • Type LB Cable-Pull Access
  • High-Impact Nonconductive PVC
  • CSA-Certified and UL-Listed
  • Factory-Assembled PVC Cover and Brass Hardware
  • Kraloy Solvent-Cement Joining

Technical Specifications

Product information and specifications for the selected item.

SKU: LB125

Product Information

BrandKraloy
MPNLB125
SKULB125
CategoryConduit Fittings

Technical Details

Fitting TypeType LB Conduit Body
Conduit CompatibilityPVC
Trade Size (in.)1-1/4 in
MaterialPVC

Installation

Solvent-cement joiningKraloy solvent cement
Cable-pull applicationProvides an access point for cable pulling where conduit changes direction 90 degrees from a rear access point.

Electrical

Internal fill volume28 (459) cu.in (cu.cm)
Maximum wire-fill marking on body#2 AWG
Electrical conductivityNonconductive

Construction

Factory assemblyFully factory assembled
Cover hardware and sealing partsThreaded brass inserts and brass screws; PVC gasket and cover supplied
Gasket and cover designFlexible gasket allows repeated cover removal without wear or cracking.
Cover serviceabilityCan be removed as often as needed without wear or cracking
Fastener constructionThreaded brass screws and inserts

Compliance

Applicable standardsCSA C22.2 No. 85; UL Listed; UL 514B/514C; NEMA TC3
Wet-location listingUL listed for wet locations

Chemical Resistance

Chemical resistanceResistant to acids, alkalis and salt solutions

Operating Conditions

NEC ambient-temperature limitNot in excess of 122 °F

Environmental Resistance

Corrosion resistanceResistant to external corrosion and pitting; will not rust

Product Documents

Your cart

0 products 0 units

Your cart is empty.

Add products as you browse, then review them here.