Skip to content
Kraloy

Kraloy 1/2" Schedule 40 Standard-Radius 90° Plain-End PVC Conduit Elbow

0 Reviews
SKU
P950

The Kraloy P950 is a 1/2-inch PVC 90-degree elbow with a plain end for use with nonmetallic solvent-weld fittings. It is approved for exposed, concrete-encased, and direct-burial applications.

  • 1/2-Inch PVC 90° Elbow
  • Plain-End Solvent-Weld Connection
  • Exposed, Concrete-Encased, Direct-Burial Use
  • Listed Standards
  • NEC Ambient-Temperature Use Limit
  • Nonconductive Material

The Kraloy P950 is a 1/2-inch PVC 90-degree elbow with a plain end for use with nonmetallic solvent-weld fittings. It is approved for exposed, concrete-encased, and direct-burial applications.

Product Overview

The Kraloy P950 is a 1/2-inch PVC 90-degree elbow with a plain end for use with nonmetallic solvent-weld fittings. It is approved for exposed, concrete-encased, and direct-burial applications.

  • 1/2-Inch PVC 90° Elbow
  • Plain-End Solvent-Weld Connection
  • Exposed, Concrete-Encased, Direct-Burial Use
  • Listed Standards
  • NEC Ambient-Temperature Use Limit
  • Nonconductive Material

Technical Specifications

Product information and specifications for the selected item.

SKU: P950

Product Information

BrandKraloy
SKUP950
CategoryConduit Fittings

Technical Details

Fitting TypeElbow
Conduit CompatibilityPVC
Trade Size (in.)1/2 in
MaterialPVC

Environmental

Biological resistanceResistant to fungi, bacterial action, rodents and termites
Sunlight and weather agingRetains original properties after years of direct sunlight, heat and extreme weather exposure
Corrosion resistanceResistant to external corrosion and pitting; will not rust

Installation

Joint cure and water resistanceThe fully cured joint is waterproof after 24 hours
Solvent-cement installationApply solvent cement to both surfaces, slide together, quarter-turn, and hold briefly
Approved installation applicationsApproved for exposed, concrete-encased, and direct-burial applications

Operating Conditions

NEC ambient-temperature use limitNot in excess of 122 °F

Chemical Resistance

Chemical resistanceResistant to acids, alkalis and salt solutions

Connection

End connection / joining methodPlain end; for use with nonmetallic solvent-weld fittings

Compliance

Listings and standardsCSA C22.2 No. 85; UL Listed; UL 514B–UL 514C; NEMA TC3

Fire Performance

Ignition behaviorWill not burn unless an external flame source is applied; will not sustain ignition once the flame source is removed
Flash ignition temperature850 °F

Construction

Impact and tensile strengthHigh impact strength and high tensile strength

Electrical

Electrical conductivityNonconductive

Product Documents

Your cart

0 products 0 units

Your cart is empty.

Add products as you browse, then review them here.