Skip to content
Kraloy

Kraloy 2" Conduit Expansion Joint

0 Reviews
SKU
PEJ200

The Kraloy PEJ200 is a 2-inch PVC expansion conduit fitting with 4 inches of travel for temperature-related length changes in exposed conduit runs. It uses a pre-lubricated telescoping mechanism and includes O-rings to help prevent leakage.

  • 2-Inch PVC Expansion Fitting
  • 4-Inch Expansion Travel
  • 25°F Temperature-Change Threshold
  • Telescoping Two-Tube Design
  • Included O-Rings
  • CSA and UL Compliance

The Kraloy PEJ200 is a 2-inch PVC expansion conduit fitting with 4 inches of travel for temperature-related length changes in exposed conduit runs. It uses a pre-lubricated telescoping mechanism and includes O-rings to help prevent leakage.

Product Overview

The Kraloy PEJ200 is a 2-inch PVC expansion conduit fitting with 4 inches of travel for temperature-related length changes in exposed conduit runs. It uses a pre-lubricated telescoping mechanism and includes O-rings to help prevent leakage.

  • 2-Inch PVC Expansion Fitting
  • 4-Inch Expansion Travel
  • 25°F Temperature-Change Threshold
  • Telescoping Two-Tube Design
  • Included O-Rings
  • CSA and UL Compliance

Technical Specifications

Product information and specifications for the selected item.

SKU: PEJ200

Product Information

BrandKraloy
SKUPEJ200
CategoryConduit Fittings

Technical Details

Conduit CompatibilityPVC
Trade Size (in.)2 in
MaterialPVC
Height (in.)2.85
Width (in.)2.85
Length (in.)9.25
Weight (lb.)1.2999

Sealing

SealO-rings included to help prevent leakage

Compliance

Compliance standards/listingCSA C22.2 No. 85; UL Listed
Compliance marksCSA and UL (ULI) marks shown

Installation

Support-strap placementPlace straps approximately 1 ft on either side of the joint.
Barrel and conduit supportClamp the barrel tightly while leaving the conduit loose enough in its hangers to move as it expands and contracts.
Piston alignmentMount so the piston travels straight in the barrel; misalignment can cause binding and prevent correct operation.
Mounting orientationCan be installed vertically or horizontally
Vertical orientationWhen mounted vertically, position the piston downward to keep dirt from collecting at the muzzle.
Mounting and supportClamp the barrel tight and leave the conduit loose enough in its hangers to move during expansion and contraction.

Operating Conditions

Application and temperature-change thresholdDesigned to compensate for temperature-related length changes in exposed conduit runs; expansion joints are required when the temperature change exceeds 25°F (14°C).
Temperature-variation use conditionExpansion joints must be used where expected temperature variation exceeds 25°F.

Construction

Sealing componentsO-rings
Expansion mechanismTwo tubes, with one telescoping inside the other
LubricationPre-lubricated for smooth adjustment
Telescoping constructionTwo tubes, one telescoping inside the other

Movement

Expansion travel4 in

Product Documents

Your cart

0 products 0 units

Your cart is empty.

Add products as you browse, then review them here.