Skip to content
Kraloy

Kraloy 4" Schedule 40 Standard-Radius 45° PVC Conduit Elbow, Plain-End

0 Reviews
SKU
P4400

Kraloy P4400 is a 4-inch PVC 45-degree elbow for use with nonmetallic solvent-weld fittings. It is nonconductive, uses solvent cement for joining, and is specified for exposed locations, concrete encasement, and direct burial.

  • 4-Inch PVC 45-Degree Elbow
  • Nonconductive Construction
  • Nonmetallic Solvent-Weld Compatibility
  • Exposed, Encased, or Buried Use
  • Corrosion and Pitting Resistance
  • UL, CSA, and NEMA Standards

Product Overview

Kraloy P4400 is a 4-inch PVC 45-degree elbow for use with nonmetallic solvent-weld fittings. It is nonconductive, uses solvent cement for joining, and is specified for exposed locations, concrete encasement, and direct burial.

Technical Specifications

Product information and specifications for the selected item.

SKU: P4400

Product Information

BrandKraloy
SKUP4400
CategoryConduit Fittings

Technical Details

Fitting TypeElbow
Conduit CompatibilityPVC
Trade Size (in.)4 in
MaterialPVC
Height (in.)18.88
Width (in.)11
Length (in.)4.5
Weight (lb.)3.9285

Electrical

Electrical propertyNonconducting
Electrical conductivityNonconductive

Installation

Joint compatibilityFor use with nonmetallic solvent-weld fittings
Cold-weather joint preparationPrime joining surfaces and keep cement warm to prevent thickening and gelation
Cold-weather installation temperature guidanceNormal installation 40–110; high-strength joints have been made as low as -15 °F
Solvent-cement joint cure24 hours to fully cure; the cured joint is waterproof
Conduit joining methodSolvent cement; use Kraloy Solvent Cement

Applications

Approved installation locationsExposed locations, concrete encasement, and direct burial

Compliance

StandardUL 651
Applicable listing and standardsUL Listed; CSA C22.2 No. 85; UL 514B; NEMA TC3

Durability

Chemical resistanceResistant to acids, alkalis, and salt solutions
Biological and pest resistanceResistant to fungi, bacterial action, rodents, and termites
Corrosion resistanceResistant to external corrosion and pitting; will not rust
Weathering and sunlight durabilityRetains original properties after years of direct sunlight, heat, and extreme weather exposure

Operating Conditions

NEC ambient-temperature use limitNot in excess of 122 °F

Mechanical

Impact resistanceImpact resistant

Fire Performance

Fire behavior and flash ignition temperatureWill not sustain ignition after the external flame source is removed; flash ignition temperature is 850°F

Construction

Impact and tensile strengthHigh impact and high tensile strength

Product Documents

Your cart

0 products 0 units

Your cart is empty.

Add products as you browse, then review them here.