Skip to content
DEWALT

Lok/Bolt Hex Nut Sleeve Anchor, 1/2 x 3 in.

0 Reviews
SKU
05030-EACH

Lok/Bolt Hex Nut Sleeve Anchor, 1/2 x 3 in.Additional specifications Additional specifications · Installation Plow bolt thread size 3/8-16 UNC Wrench size 9/16 in. Hole-drilling depth instruction At least 1/2 in, or one anchor diameter deeper than required embedment Fixture seating procedure Drive through the fixture until the nut and washer are ...

Needs Data

Lok/Bolt Hex Nut Sleeve Anchor, 1/2 x 3 in.Additional specifications Additional specifications · Installation Plow bolt thread size 3/8-16 UNC Wrench size 9/16 in. Hole-drilling depth instruction At least 1/2 in, or one anchor diameter deeper than required embedment Fixture seating procedure Drive through the fixture until the nut and washer are ...

Product Overview

Lok/Bolt Hex Nut Sleeve Anchor, 1/2 x 3 in.

Additional specifications

Additional specifications · Installation

Plow bolt thread size 3/8-16 UNC
Wrench size 9/16 in.
Hole-drilling depth instruction At least 1/2 in, or one anchor diameter deeper than required embedment
Fixture seating procedure Drive through the fixture until the nut and washer are firmly seated against it and the anchor reaches the required embedment.
Minimum embedment in normal-weight concrete 1-1/2 in.
Hole cleaning Remove drilling dust and debris during drilling or afterward using suction or forced air.
Fixture clearance hole 9/16 in.
Guide installation torque 25 ft-lb
Tightening procedure Turn the nut or head 3 to 5 turns past finger tight, or apply the guide installation torque from the finger-tight position.
Drill-bit tolerance standard Drill-bit tolerances must meet ANSI Standard B212.15.
ANSI drill bit size 1/2 in.
Drill-hole depth At least 1/2 in. or one anchor diameter deeper than the required embedment.

Additional specifications · Strength

Minimum plow bolt yield strength 53,700 psi

Additional specifications · Construction

Assembly Preassembled for immediate installation.
Sleeve centering The sleeve keeps the anchor centered in the hole.
Fixture-tightening behavior Designed to allow the fixture to draw snug against the base material during tightening.
Sleeve contact area 360° contact area for even stress distribution.

Additional specifications · Compatibility

Suitable base materials Normal-weight concrete; grouted concrete masonry (CMU); hollow concrete masonry (CMU); brick masonry; stone.
Base-material compatibility Concrete or masonry

Additional specifications · Materials

Plow bolt material grade AISI 1018
Expansion sleeve material grade AISI 1010

Additional specifications · Masonry Installation

Anchor length selection For hollow concrete masonry, account for attachment thickness, face-shell embedment, and approximately 1/4 in. when selecting anchor length.

Additional specifications · Compliance

Zinc plating specification ASTM B633, SC1, Type III (Fe/Zn 5)

Technical Specifications

Product information and specifications for the selected item.

SKU: 05030-EACH

Product Information

BrandDEWALT
MPN05030-EACH
SKU05030-EACH
CategoryFasteners & Hardware

Key Specs

Fastener TypeSleeve Anchors
Fastener MaterialSteel
Fastener PlatingZinc

Capacity & Fastener

Fastener TypeSleeve Anchors
Fastener MaterialSteel
Plow bolt thread size3/8-16 UNC
Minimum plow bolt yield strength53,700 psi
AssemblyPreassembled for immediate installation.
Sleeve centeringThe sleeve keeps the anchor centered in the hole.
Plow bolt material gradeAISI 1018
Sleeve contact area360° contact area for even stress distribution.
Expansion sleeve material gradeAISI 1010

Finish & Use

Fastener PlatingZinc
Measurement SystemInches
Fixture seating procedureDrive through the fixture until the nut and washer are firmly seated against it and the anchor reaches the required embedment.
Suitable base materialsNormal-weight concrete; grouted concrete masonry (CMU); hollow concrete masonry (CMU); brick masonry; stone.
Hole cleaningRemove drilling dust and debris during drilling or afterward using suction or forced air.
Base-material compatibilityConcrete or masonry
Guide installation torque25 ft-lb
Tightening procedureTurn the nut or head 3 to 5 turns past finger tight, or apply the guide installation torque from the finger-tight position.
Fixture-tightening behaviorDesigned to allow the fixture to draw snug against the base material during tightening.
Drill-bit tolerance standardDrill-bit tolerances must meet ANSI Standard B212.15.
Zinc plating specificationASTM B633, SC1, Type III (Fe/Zn 5)

Dimensions & Weight

Wrench size9/16 in.
Hole-drilling depth instructionAt least 1/2 in, or one anchor diameter deeper than required embedment
Minimum embedment in normal-weight concrete1-1/2 in.
Fixture clearance hole9/16 in.
Anchor length selectionFor hollow concrete masonry, account for attachment thickness, face-shell embedment, and approximately 1/4 in. when selecting anchor length.
ANSI drill bit size1/2 in.
Drill-hole depthAt least 1/2 in. or one anchor diameter deeper than the required embedment.

Your cart

0 products 0 units

Your cart is empty.

Add products as you browse, then review them here.