Skip to content
EMC FASTEN

Long Lag Screw Shield Anchor, 1/2 in.

0 Reviews
SKU
LSL12 - EACH

Long Lag Screw Shield Anchor, 1/2 in.Additional specifications Additional specifications · Compliance Federal specification GSA FFS-325C, Group 2, Type 1, Class 1 (long) Additional specifications · Compatibility UNC thread size 1/2-6 Suitable substrates Concrete, masonry and masonry joints Compatible substrates Concrete, masonry, and mortar joi...

Needs Data

Product Overview

Long Lag Screw Shield Anchor, 1/2 in.

Additional specifications

Additional specifications · Compliance

Federal specification GSA FFS-325C, Group 2, Type 1, Class 1 (long)

Additional specifications · Compatibility

UNC thread size 1/2-6
Suitable substrates Concrete, masonry and masonry joints
Compatible substrates Concrete, masonry, and mortar joints
Recommended masonry condition Long version recommended for soft or weak masonry

Additional specifications · Construction

Thread length 1-7/8 in.
Bolt removability Internally threaded; allows easy bolt removal and service work

Additional specifications · Installation

Drill-bit requirement Use solid carbide-tipped drill bits meeting ANSI B212.15 diameter standards
Hole drilling requirements Drill perpendicular to the work surface; do not ream the hole or allow the drill to wobble
Drill bit diameter 3/4 in.
Concrete bottom clearance Keep the hole no closer than two diameters to the concrete bottom surface
Hole depth and clearance Drill at least one anchor diameter deeper than the intended embedment, but leave at least two diameters to the opposite concrete surface
Minimum embedment depth 3 in.
Hole cleaning Clean the hole with a nylon brush and compressed air
Installation torque Approximately 20 ft.-lbs.

Additional specifications · Applications

Long-version substrate recommendation Recommended for soft or weak masonry to add strength to the substrate

Additional specifications · Durability

Corrosion resistance Corrosion resistant

Technical Specifications

Product information and specifications for the selected item.

SKU: LSL12 - EACH

Product Information

BrandEMC FASTEN
MPNLSL12 - EACH
SKULSL12 - EACH
CategoryFasteners & Hardware

Key Specs

Weight Capacity (lb.)150 - 300
Fastener TypeLag Shields
Fastener MaterialMetal
Interior/ExteriorExterior

Capacity & Fastener

Weight Capacity (lb.)150 - 300
Fastener TypeLag Shields
Fastener MaterialMetal
Federal specificationGSA FFS-325C, Group 2, Type 1, Class 1 (long)
UNC thread size1/2-6
Bolt removabilityInternally threaded; allows easy bolt removal and service work

Finish & Use

Interior/ExteriorExterior
Measurement SystemInches
Suitable substratesConcrete, masonry and masonry joints
Drill-bit requirementUse solid carbide-tipped drill bits meeting ANSI B212.15 diameter standards
Hole drilling requirementsDrill perpendicular to the work surface; do not ream the hole or allow the drill to wobble
Drill bit diameter3/4 in.
Concrete bottom clearanceKeep the hole no closer than two diameters to the concrete bottom surface
Hole depth and clearanceDrill at least one anchor diameter deeper than the intended embedment, but leave at least two diameters to the opposite concrete surface
Minimum embedment depth3 in.
Hole cleaningClean the hole with a nylon brush and compressed air
Long-version substrate recommendationRecommended for soft or weak masonry to add strength to the substrate
Corrosion resistanceCorrosion resistant
Compatible substratesConcrete, masonry, and mortar joints
Recommended masonry conditionLong version recommended for soft or weak masonry
Installation torqueApproximately 20 ft.-lbs.

Dimensions & Weight

Length (in.)3
Thread length1-7/8 in.

Your cart

0 products 0 units

Your cart is empty.

Add products as you browse, then review them here.