Skip to content

Lutron Caséta Original Smart In-Wall ELV+ Dimmer, White

0 Reviews
SKU
PD-5NE-WH

The Lutron PD-5NE-WH is a white Caséta Original smart in-wall ELV+ dimmer for 120 V circuits. It requires a neutral and supports forward- and reverse-phase dimming, three-way control, and dimmable LED, ELV, MLV, incandescent, and halogen loads.

  • 120 V; neutral required
  • Dimmable load compatibility
  • Forward/reverse-phase dimming
  • Load capacity by type
  • Three-way circuit control
  • Pico remote and sensor pairing

The Lutron PD-5NE-WH is a white Caséta Original smart in-wall ELV+ dimmer for 120 V circuits. It requires a neutral and supports forward- and reverse-phase dimming, three-way control, and dimmable LED, ELV, MLV, incandescent, and halogen loads.

Product Overview

The Lutron PD-5NE-WH is a white Caséta Original smart in-wall ELV+ dimmer for 120 V circuits. It requires a neutral and supports forward- and reverse-phase dimming, three-way control, and dimmable LED, ELV, MLV, incandescent, and halogen loads.

  • 120 V; neutral required
  • Dimmable load compatibility
  • Forward/reverse-phase dimming
  • Load capacity by type
  • Three-way circuit control
  • Pico remote and sensor pairing

Technical Specifications

Product information and specifications for the selected item.

SKU: PD-5NE-WH

Product Information

BrandLutron
MPNPD-5NE-WH
SKUPD-5NE-WH
UPC / GTIN784276217699
CategoryDimmers

Key Specs

Voltage (V)120 V
Circuit Connection3-Way
Compatible Bulb TypeCFL, Halogen, Incandescent, LED, MLV
Dimmable CapabilityDimmable
Control StylePush Button

Electrical Ratings

Voltage (V)120 V
Circuit Connection3-Way
Hi-lume 1% 2-wire LED driver capacity1 driver minimum; up to 20 drivers in all ganging positions
Dimmable ballast capacity1 ballast minimum; 400 VA maximum in all ganging positions
MLV transformer setupFor MLV loads, select forward phase; derate transformers to 75% of rating.
ELV halogen load capacity10 minimum; 500 maximum not ganged; 400 maximum at end of gang; 300 maximum in middle of gang W
LED load capacity1 bulb minimum; 250 W maximum in all ganging positions
MLV halogen load capacity10 W minimum; 400 VA maximum in all ganging positions
Incandescent/halogen load capacity10 minimum; 500 maximum not ganged; 400 maximum at end of gang; 300 maximum in middle of gang W
Ganged installation deratingDerating is required when ganged with other switches or dimmers in the same wallbox.
PHPM-PA/3F and GRX-TVI interface capacity1 interface minimum; up to 3 interfaces in all ganging positions
MLV operating precautionOperating a dimmed magnetic low-voltage circuit with all lamps inoperative or removed may result in current flow above normal levels.

Dimming & Compatibility

Compatible Bulb TypeCFL, Halogen, Incandescent, LED, MLV
Dimmable CapabilityDimmable
Control StylePush Button
Works WithLutron, Proprietary App
RF communication range to hub or repeater60 ft (18 m) line-of-sight or 30 ft (9 m) through walls.
Dimmable ballast setupDimmable ballasts require low-end trim.
Loads not suitable for controlDo not use to control receptacles, motor-driven appliances, or transformer-supplied appliances.
Compatible dimmable ballast typesTu-Wire, Mark 10, and PowerSense
Standalone paired-device limitUp to 10 Pico remote controls and Caséta motion sensors total per dimmer when no Smart Hub is installed. devices

Features & Finish

FeaturesIndicator Light, On/Off Switch, Programmable, Remote Control Compatible
Wall Plate IncludedDimmer w/o Wall Plate
Color FamilyWhite
cULus and NOM approvalscULus Listed; NOM Certified
Operating environmentIndoor use only; 32 °F to 104 °F (0 °C to 40 °C); 0% to 90% humidity, non-condensing.
NEMA SSL 7A / CA Title 24 compliance conditionCompliant when set to forward-phase mode.
NEMA 410 approvalPD-5NE is included in the NEMA 410 model group.
Surge voltage resistanceTested to withstand surge voltages without damage or loss of operation, in accordance with IEEE C62.41-1991.
Outside fin requirementDo not remove outside fins at the ends of a gang.
FCC and regional approvalsFCC Class B digital-device approval under Part 15; Industry Canada Certified; IFTEL Certified
Electrostatic discharge resistanceTested to withstand electrostatic discharge without damage or memory loss, in accordance with IEC 61000-4-2.

Dimensions & Weight

Height (in.)4.69
Width (in.)2.94
Length (in.)1.44
Weight (lb.)0.25
Wallbox requirementsRequires a 1-gang U.S. wallbox; recommended depth 3½ in (89 mm), minimum depth 2¼ in (57 mm).

Product Documents

Your cart

0 products 0 units

Your cart is empty.

Add products as you browse, then review them here.