Skip to content

Lutron RadioRA 3 Sunnata RF Switch, Gloss White

0 Reviews
SKU
RRST-8ANS

The Lutron RRST-8ANS Sunnata RF switch is a gloss-white, 120 V non-dimming rocker for on/off control of lighting loads up to 8 A or motor loads up to 1/4 HP (5.8 A). It requires a neutral, supports multi-location control in RadioRA 3, and includes a soft-glow locator light.

  • 120 V Non-Dimming Rocker
  • 8 A Lighting Load
  • 1/4 HP Motor Load
  • Neutral Required
  • RadioRA 3 RF Control
  • Multi-Location Control

Product Overview

The Lutron RRST-8ANS Sunnata RF switch is a gloss-white, 120 V non-dimming rocker for on/off control of lighting loads up to 8 A or motor loads up to 1/4 HP (5.8 A). It requires a neutral, supports multi-location control in RadioRA 3, and includes a soft-glow locator light.

Technical Specifications

Product information and specifications for the selected item.

SKU: RRST-8ANS

Product Information

BrandLutron
MPNRRST-8ANS
SKURRST-8ANS
CategorySwitches

Key Specs

Amperage (A)8
Voltage (V)120 V
Control StyleRocker
Circuit ConnectionMulti-Location
Wire Connection TypeQuickwire Push-In & Side Wired
Works WithLutron

Electrical Ratings

Amperage (A)8
Voltage (V)120 V
Minimum load requirementsLED: 1 bulb; incandescent/halogen and ELV: 10 W; MLV: 10 VA.
Typical power consumption0.5 W with load off and locator light enabled
Minimum lighting load10 W/VA for incandescent, MLV, ELV and fluorescent lighting; one LED bulb minimum
Supported load typesIncandescent, MLV, ELV, tungsten halogen, fluorescent, LED, CFL, and motor loads.

Switch Configuration

Control StyleRocker
Circuit ConnectionMulti-Location
Wire Connection TypeQuickwire Push-In & Side Wired
Switch placement in multi-location wiringWire the switch on the load side, not the line side
Companion wiring limitUp to four companion switches (-RS); total wire length up to 150 ft (45 m)
Terminal tightening torque5 in-lb
Required wiring positionLoad-side installation is required in 3-way or multi-location applications.
Neutral requirementRequired for all load types
Conductor material and sizeSolid copper only; 12/14 AWG for screw connection, 14 AWG only for push-in terminals

Compatibility

Works WithLutron
Wireless device spacingWithin 25 ft (7.6 m) of two additional compatible Clear Connect-Type X devices
Prohibited loadNot for controlling receptacles
Standard multi-way switch compatibilityStandard 3-way and 4-way switches are not compatible.
Wireless protocol and processor rangeClear Connect-Type X RF; within 75 ft (22.8 m) of a centrally located RadioRA 3 wireless processor/gateway
System radio frequency2.4 GHz
Wallbox recommendation for masonryUse a metal wallbox for best wireless performance when installed in a concrete or stone wall
Receptacle control restrictionDo not use to control receptacles.

Features & Finish

FeaturesGrounded, Indicator Light, On/Off Switch, Programmable, Remote Control Compatible
Wall Plate IncludedNo Wall Plate
Color FamilyWhite
Bundle/SingleSingle Product
Surge protection testIEEE C62.41-1991
Operating environment32 °F to 104 °F (0 °C to 40 °C); 0% to 90% humidity, non-condensing; indoor use only
Regulatory approvalscULus, NOM, FCC, IC, IFT
ESD protection testIEC 61000-4-2
Operating humidity0% to 90%, non-condensing.
Ambient operating temperature32–104 °F

Dimensions & Weight

Height (in.)4.5
Width (in.)2.3
Length (in.)2.3
Weight (lb.)0.26
Wallbox depthU.S. wallbox; 3½ in (89 mm) depth recommended, 2¼ in (57 mm) minimum

Product Documents

Your cart

0 products 0 units

Your cart is empty.

Add products as you browse, then review them here.