Skip to content

Lutron Skylark Contour LED+ Dimmer, Gloss Almond, Single-Pole/3-Way

0 Reviews
SKU
CTCL-153P-AL

The Lutron Skylark Contour LED+ dimmer (CTCL-153P-AL) is a 120 V, gloss almond control for single-pole or 3-way lighting circuits. It combines a rocker on/off switch with a linear slider and is rated for 150 W LED/CFL loads or 600 W incandescent/halogen loads. No neutral wire is required.

  • 150 W LED/CFL and 600 W Incandescent/Halogen Loads
  • Single-Pole/3-Way Circuit Support
  • 120 V Operation
  • Rocker On/Off and Linear Slider
  • No Neutral Wire Required
  • Gloss Almond Finish

Product Overview

The Lutron Skylark Contour LED+ dimmer (CTCL-153P-AL) is a 120 V, gloss almond control for single-pole or 3-way lighting circuits. It combines a rocker on/off switch with a linear slider and is rated for 150 W LED/CFL loads or 600 W incandescent/halogen loads. No neutral wire is required.

Technical Specifications

Product information and specifications for the selected item.

SKU: CTCL-153P-AL

Product Information

BrandLutron
MPNCTCL-153P-AL
SKUCTCL-153P-AL
UPC / GTIN027557003674
CategoryDimmers

Key Specs

Voltage (V)120 V
Circuit Connection3-Way
Compatible Bulb TypeCFL, Halogen, Incandescent, LED
Dimmable CapabilityDimmable
Control StyleSlide

Electrical Ratings

Voltage (V)120 V
Circuit Connection3-Way
Minimum load1 compatible LED lamp or 10 W incandescent/halogen
Incandescent/halogen load rating600 W
Multigang incandescent/halogen deratingNo side sections removed: 600; one side removed: 500; two sides removed: 400
Load ratings150 W LED; 600 W incandescent/halogen
Dimmable LED/CFL load rating150 W
Wire interchangeabilityThe black and solid red dimmer wires are interchangeable
Neutral wire requirementNo neutral wire required
Forward-phase LED driver rating250 W maximum; up to 6 Lutron LTEA Hi-lume 1% forward-phase LED drivers
LTEA Hi-lume driver rating250 (maximum 6 drivers) W

Dimming & Compatibility

Compatible Bulb TypeCFL, Halogen, Incandescent, LED
Dimmable CapabilityDimmable
Control StyleSlide
Fixture installation requirementFor permanently installed fixtures only
4-way installation positionInstall on the line side or load side, not at the 4-way location
3-way circuit limitationOnly one dimmer may be used in a 3-way circuit
Multi-location switch requirementFor 3-way and 4-way switching, use Claro switches or other mechanical switches
LED/CFL bulb requirementOnly bulbs marked or rated as dimmable may be used
Load restrictionsDo not use to control receptacles, motor-driven appliances, or transformer-supplied appliances
Minimum bulb-count caveatSome dimmable LEDs and CFLs require a minimum number of bulbs for proper operation

Features & Finish

FeaturesOn/Off Switch
Wall Plate IncludedDimmer w/o Wall Plate
Color FamilyAlmond
Safety listingUL Listed to US and Canadian safety requirements, UL1472/CSA C22.2 184.1
Operating temperature range32 °F to 104 °F (0 °C to 40 °C)
Use environmentIndoor use only
Operating environmentIndoor use only; operating temperature 32–104 °F (0–40 °C) °F / °C
Surface finishGloss
Regulatory approvalNOM

Dimensions & Weight

Height (in.)4.5
Width (in.)2.3
Length (in.)2.3
Weight (lb.)0.1
Minimum wallbox depthAt least 2½ in (64 mm) deep
Wallbox depth requirementMinimum U.S. wallbox depth: 2.5 in (64 mm) in / mm

Product Documents

  • Wallbox Wiring Devices Limited Warranty (3691329) Warranty Open / download file
  • Technical Support Wiring Tool Diagram — Dimmer in a 3-Way Application (368-4493h) Installation manual Open / download file
  • Technical Support Wiring Tool Diagram — Dimmer in a Single-Pole Application (368-4493h) Installation manual Open / download file
  • LED+ Dimmer 120 V~ 60 Hz — Quick Install Guide (0302063) Installation manual Open / download file
  • Skylark Contour LED+ Dimmer — Specification Submittal (369683) Spec sheet Open / download file

Your cart

0 products 0 units

Your cart is empty.

Add products as you browse, then review them here.