Skip to content

Lutron Skylark Contour LED+ Dimmer, Single-Pole/3-Way, Gloss White

0 Reviews
SKU
CTCL-153P-WH

The Lutron Skylark Contour LED+ CTCL-153P-WH is a gloss-white, 120 V, 60 Hz dimmer for single-pole or 3-way lighting circuits. It has a rocker on/off switch and linear slider, requires no neutral wire, and supports dimmable LED/CFL loads up to 150 W or incandescent/halogen loads up to 600 W; the wall plate is sold separately.

  • Single-Pole/3-Way Switching
  • LED, CFL, Halogen, Incandescent Compatibility
  • 150 W LED/CFL, 600 W Incandescent/Halogen Maximum
  • No Neutral Wire Required
  • Rocker On/Off and Linear Slider
  • Wall Plate Sold Separately

Product Overview

The Lutron Skylark Contour LED+ CTCL-153P-WH is a gloss-white, 120 V, 60 Hz dimmer for single-pole or 3-way lighting circuits. It has a rocker on/off switch and linear slider, requires no neutral wire, and supports dimmable LED/CFL loads up to 150 W or incandescent/halogen loads up to 600 W; the wall plate is sold separately.

Technical Specifications

Product information and specifications for the selected item.

SKU: CTCL-153P-WH

Product Information

BrandLutron
MPNCTCL-153P-WH
SKUCTCL-153P-WH
UPC / GTIN027557002967
CategoryDimmers

Key Specs

Voltage (V)120 V
Circuit Connection3-Way
Compatible Bulb TypeCFL, Halogen, Incandescent, LED
Dimmable CapabilityDimmable
Control StyleSlide

Electrical Ratings

Voltage (V)120 V
Circuit Connection3-Way
Minimum load requirement1 compatible LED, or 10 W incandescent/halogen
Mixed-load rating exampleWith one set of side sections removed and 30 W total LED wattage, up to 300 W of incandescent or halogen lighting may be added
Line frequency60 Hz
Maximum load ratings150 for dimmable LED/CFL or 600 for incandescent/halogen W
4-way installation positionInstall on the line side or load side, not in the 4-way location
Ganged incandescent/halogen load limits600 with no sides removed; 500 with one side removed; 400 with two sides removed
Wire lead interchangeabilityBlack and solid red dimmer wires are interchangeable
Neutral wire requirementNot required
Lutron LTEA driver rating250 maximum; maximum 6 drivers W
Ungrounded wallbox conditionFor an ungrounded wallbox, replacement installation is allowed with a plastic faceplate and plastic fasteners or a GFCI-protected circuit
LTEA Hi-lume driver load limit250; maximum 6 drivers W

Dimming & Compatibility

Compatible Bulb TypeCFL, Halogen, Incandescent, LED
Dimmable CapabilityDimmable
Control StyleSlide
Multi-location switch requirementUse Claro or other mechanical switches for 3-way and 4-way switching
Dimmer limit in 3-way circuitOnly one dimmer can be used in a 3-way circuit
LED/CFL lamp requirementLED and CFL bulbs must be marked or rated dimmable
Prohibited loadsDo not use to control receptacles, motor-driven appliances, or transformer-supplied appliances
Fixture applicationUse only with permanently installed fixtures
Companion switch requirementFor 3-way and 4-way switching, use Claro switches or other mechanical switches

Features & Finish

FeaturesOn/Off Switch
Wall Plate IncludedDimmer w/o Wall Plate
Color FamilyWhite
Use environmentIndoor use only
Safety approvalsUL Listed to US and Canadian safety requirements (UL 1472; CSA C22.2 184.1); NOM
Safety listingUL Listed to U.S. and Canadian safety requirements: UL1472/CSA C22.2 184.1
Normal operating warmthIt is normal for the dimmer to feel warm to the touch during operation
Operating temperature32 °F to 104 °F (0 °C to 40 °C)
Regulatory approvalNOM

Dimensions & Weight

Height (in.)4.7
Width (in.)2.9
Length (in.)1.3
Weight (lb.)0.15
Minimum wallbox depthU.S. wallbox, 2½ in (64 mm) deep minimum

Product Documents

Your cart

0 products 0 units

Your cart is empty.

Add products as you browse, then review them here.