586-554-2000
Mon–Fri 6:30am–5pm · Sat 8am–3pm
586-554-2000
Mon–Fri 6:30am–5pm
The Lutron Vive PowPak RMJS-5R-DV-B is a 5 A wireless lighting relay module rated for 120/277 VAC at 50/60 Hz, with a normally open contact, Lutron Clear Connect RF communication, and Softswitch technology.
The Lutron Vive PowPak RMJS-5R-DV-B is a 5 A wireless lighting relay module rated for 120/277 VAC at 50/60 Hz, with a normally open contact, Lutron Clear Connect RF communication, and Softswitch technology.
The Lutron Vive PowPak RMJS-5R-DV-B is a 5 A wireless lighting relay module rated for 120/277 VAC at 50/60 Hz, with a normally open contact, Lutron Clear Connect RF communication, and Softswitch technology.
Product information and specifications for the selected item.
| Brand | Lutron |
|---|---|
| MPN | RMJS-5R-DV-B |
| SKU | RMJS-5R-DV-B |
| UPC / GTIN | 0784276150484 |
| Category | Lighting Contactors |
| Contact Type | N.O. |
|---|---|
| Height (in.) | 3.94 |
| Contact Type | N.O. |
|---|---|
| Maximum wireless inputs | Up to 10 Pico remote controls, 10 occupancy/vacancy sensors, and 1 daylight sensor |
| TAA status | Listed as TAA compliant |
| Motor load rating | 1/6 at 120 V~; 1/3 at 277 V~ HP |
| Standby power consumption | <1.0 W |
| Operating environment | 32 °F to 131 °F (0 °C to 55 °C); 0% to 90% humidity, non-condensing; indoor use only |
| Canadian approvals | CSA or cUL and IC |
| RF range | 30 ft (9 m) |
| Status indicator | Shows current load status and provides programming feedback |
| Supported load types | Incandescent, MLV, ELV, resistive, inductive, magnetic fluorescent, and electronic fluorescent |
| Vive hub compatibility | Compatible with the Vive hub; it can be added later, but system reprogramming is required |
| Driver and ballast compatibility | Drivers and ballasts used with Vive wireless controls must meet FCC Class A device limits under Part 15 |
| Softswitch arc suppression and relay life | Patented Softswitch circuit eliminates relay arcing at mechanical contacts; average relay life is 1 million cycles |
| Wireless communication protocol | Lutron Clear Connect RF Technology |
| Rated load current | 5 A |
| Plenum rating | UL 2043 plenum rated |
| U.S. approvals | UL Listed in the U.S.; FCC approved as a Class B device under Part 15 |
| Plenum and air-handling space suitability | Meets NEC 2014 300.22(C)(3) plenum-use requirements; classified to CAN/ULC-S142 for air-handling-space installation |
| Wireless device placement range | Sensors and controls within 60 ft (18 m) line of sight or 30 ft (9 m) through walls; ceiling tiles do not reduce the line-of-sight range. Contact Lutron about foil-backed or metallic ceiling tiles. |
| Installation and conductor requirements | Qualified electrician installation per local and national electrical codes; copper conductors only |
| RF frequency band | 433.05–434.79 MHz |
| Mounting location | Mount only on the exterior of a junction or marshalling box; do not mount inside a metallic enclosure |
| Mexican approvals | COFETEL and NOM |
| Power failure memory | Connected loads return to the level they were at before power was interrupted |
| Height (in.) | 3.94 |
|---|---|
| Width (in.) | 2.82 |
| Length (in.) | 1.25 |
| Weight (lb.) | 0.31 |
| Mounting method and knockout | Junction or marshalling box mounting with a conduit nut or mounting screws; 1/2 in or 21 mm trade-size knockout opening |
Added to cart