Skip to content
MEAN WELL

MEAN WELL HLG-150H-24B 151.2W LED Driver, 24VDC, 6.3A, IP67, 3-in-1 Dimming

0 Reviews
SKU
HLG-150H-24B

The MEAN WELL HLG-150H-24B is a 151.2 W LED driver with nominal 24 VDC output and a rated output current of 6.3 A. It has a listed 12–24 V constant-current range, accepts 90–305 VAC or 127–431 VDC input, and provides 3-in-1 dimming by 1–10 VDC, 10 V PWM, or resistance. The driver is IP67-rated.

  • 24 VDC Output and Constant-Current Range
  • 6.3 A Rated Output Current
  • 151.2 W Rated Power
  • AC and DC Input Ranges
  • 3-in-1 Dimming
  • IP67 Rating

Product Overview

The MEAN WELL HLG-150H-24B is a 151.2 W LED driver with nominal 24 VDC output and a rated output current of 6.3 A. It has a listed 12–24 V constant-current range, accepts 90–305 VAC or 127–431 VDC input, and provides 3-in-1 dimming by 1–10 VDC, 10 V PWM, or resistance. The driver is IP67-rated.

Technical Specifications

Product information and specifications for the selected item.

SKU: HLG-150H-24B

Product Information

BrandMEAN WELL
MPNHLG-150H-24B
SKUHLG-150H-24B
CategoryLED Drivers & Ballasts

Electrical

Wattage Range151.2 W
Efficiency93% typical for the HLG-150H-24 model
Input frequency range47–63 Hz
Output wire specificationMinimum 18 AWG and minimum 20 AWG × 2C
Rated output current6.3 A
Over-voltage protection threshold28–34 V; output shuts down with auto-recovery or repowering
AC input current1.7 A at 115 VAC; 0.75 A at 230 VAC; 0.7 A at 277 VAC (typical)
Inrush current65 A cold-start inrush at 230 VAC (twidth 425 μs measured at 50% Ipeak)
Maximum ripple and noise150 mVp-p
Line and load regulationLine regulation ±0.5%; load regulation ±0.5%
Power factorPF ≥0.98 at 115 VAC, ≥0.95 at 230 VAC, and ≥0.92 at 277 VAC at full load
Input supply range90–305 VAC AC input; 127–431 VDC input. Derating may be needed at low input voltages. VAC / VDC

Compatibility & Operation

Product typeLED Drivers
Dimming methods1–10 VDC, 10 V PWM, or resistance applied between DIM+ and DIM−.
Operating humidity20–95% RH, non-condensing
LED load compatibilityDirect connection to LEDs is suggested; not suitable for use with additional drivers.
Dimming wiring restrictionDo not connect DIM− to −V.
Dimming range10–100% of rated output current
Operating case temperatureCase temperature: −40 to +90 °C

Certifications & Warranty

Ratings & CertificatesCULUS
Residential installation suitabilityNon-IC; not suitable for residential installation
Typical lifetimeTypical operating lifetime exceeds 62,000 hours when case temperature is about 80 °C or lower

Dimensions & Weight

Height (in.)1.5276
Width (in.)2.6772
Length (in.)8.9764
Weight (lb.)2.5353
Construction and coolingMetal housing; fanless design for free-air convection
Top cover configurationNo holes provided

Product Documents

Your cart

0 products 0 units

Your cart is empty.

Add products as you browse, then review them here.