Skip to content
MEAN WELL

MEAN WELL HLG-240H-12B 12V 192W Dimmable LED Driver

0 Reviews
SKU
HLG-240H-12B

The MEAN WELL HLG-240H-12B is a 12 VDC, 192 W LED driver with a rated output current of 16 A. It is specified for constant-voltage/constant-current operation, supports 1-10 VDC, 10 V PWM, or resistance dimming, and has an IP67 rating.

  • 12 VDC Output
  • 192 W, 16 A Rated Output
  • Three Dimming Control Methods
  • IP67 Rating
  • Direct LED Connection
  • B-Type Lead-Wire Sizes

Product Overview

The MEAN WELL HLG-240H-12B is a 12 VDC, 192 W LED driver with a rated output current of 16 A. It is specified for constant-voltage/constant-current operation, supports 1-10 VDC, 10 V PWM, or resistance dimming, and has an IP67 rating.

Technical Specifications

Product information and specifications for the selected item.

SKU: HLG-240H-12B

Product Information

BrandMEAN WELL
MPNHLG-240H-12B
SKUHLG-240H-12B
UPC / GTIN4711287450391
CategoryLED Drivers & Ballasts

Key Specs

Wattage Range192 W
Voltage12V

Electrical

Wattage Range192 W
Voltage12V
Line and load regulationLine regulation ±0.5%; load regulation ±2.0%
Overvoltage responseShuts down and latches off; re-powering is required to recover
Overtemperature responseShuts down the output and automatically recovers after temperature falls
B-type lead wire sizesInput: 17 AWG / 1.0 mm², 3-core; output: 14 AWG, 2-core; dimming: UL2517 20 AWG, 2-core
Typical power factor≥0.98 at 115 VAC; ≥0.95 at 230 VAC, at full load
Short-circuit protectionHiccup mode; automatically recovers after the fault is removed
Typical efficiency90 %
Overcurrent protection95–108% threshold; constant-current limiting with automatic recovery after fault removal
Maximum units per circuit breaker2 on a type-B or 4 on a type-C 16 A circuit breaker at 230 VAC units
Inrush current75 (typical cold start; 570 μs pulse width, measured at 50% Ipeak)
Rated output current16 A
Total harmonic distortion<20% at loads ≥50% on 115/230 VAC or ≥75% on 277 VAC
Dimming source current100 (typical) µA
Input frequency range47–63 Hz

Compatibility & Operation

Product typeLED Drivers
PWM dimming frequency range100–3,000 Hz
Dimming circuit isolationNot isolated from the secondary output
Dimming control methods1–10 VDC, 10 V PWM, or resistance between DIM+ and DIM−
Operating case temperature-40 to +90 °C
Operating humidity20–95% RH, non-condensing
LED load compatibilityDirect LED connection is suggested; not suitable for use with additional drivers
Fixture on/off controlA switch and relay can turn the lighting fixture on and off
Cooling methodFanless
Dimming wiring cautionDo not connect DIM− to −V

Certifications & Warranty

Ratings & CertificatesCULUS, ROHS

Dimensions & Weight

Height (in.)1.528
Width (in.)2.677
Length (in.)9.614
Weight (lb.)2.866
Housing constructionMetal housing

Product Documents

Your cart

0 products 0 units

Your cart is empty.

Add products as you browse, then review them here.