Skip to content
MEAN WELL

MEAN WELL HLG-240H-24B 240W 24V B-Type Dimmable LED Driver

0 Reviews
SKU
HLG-240H-24B

The MEAN WELL HLG-240H-24B is a 240 W, 24 V LED driver with a 10 A rated output and B-type leads. It supports 1–10 VDC, 10 V PWM, or resistance dimming, and is listed as cULus with a damp-location rating.

  • 240 W Rated Output
  • 24 V, 10 A Output
  • Three Dimming Control Methods
  • B-Type Lead Configuration
  • cULus and Damp-Location Ratings
  • 9.61 × 2.68 × 1.53 in Dimensions

Product Overview

The MEAN WELL HLG-240H-24B is a 240 W, 24 V LED driver with a 10 A rated output and B-type leads. It supports 1–10 VDC, 10 V PWM, or resistance dimming, and is listed as cULus with a damp-location rating.

Technical Specifications

Product information and specifications for the selected item.

SKU: HLG-240H-24B

Product Information

BrandMEAN WELL
MPNHLG-240H-24B
SKUHLG-240H-24B
UPC / GTIN4711287450544
CategoryLED Drivers & Ballasts

Electrical

Wattage Range240 W
Line regulation±0.5 %
Typical efficiency92.5 %
Maximum ripple and noise150 mVp-p
Load regulation±0.5 %
Rated output current10 A
Input frequency range47–63 Hz

Compatibility & Operation

Product typeLED Drivers
Cooling and case-temperature rangeFanless, free-air convection; case operating range −40 to +90 °C
Dimming source current100 µA
Overcurrent protection95–108%; constant-current limiting with automatic recovery after fault removal
Mains connection requirementMust be used behind a switch, not permanently connected to mains
High-altitude deratingFor fanless models above 2,000 m (6,500 ft), ambient derating is 3.5 °C per 1,000 m
Overvoltage responseOutput shuts down and latches off; re-power to recover
Dimming control methods1–10 VDC, 10 V PWM signal, or resistance between DIM+ and DIM−
Dimming wiring cautionDo not connect DIM− to −V
Overtemperature responseOutput shuts down and recovers automatically after temperature falls
LED connection compatibilityDirect LED connection is suggested; not suitable for use with additional drivers
PWM dimming frequency100 Hz–3 kHz
Short-circuit protectionHiccup mode; automatically recovers after fault removal
B-type lead constructionInput: 3-core 17 AWG, 1.0 mm² SJOW/H05RN-F; output: 2-core 17 AWG, 1.0 mm² SJOW/05RN-F; dimming: 2-core UL2517, 20 AWG
Working humidity20–95 % RH
Storage temperature and humidity−40 to +80 °C; 10–95% RH

Certifications & Warranty

Ratings & CertificatesCULUS, Damp Location
Typical service life conditionMore than 62,000 operating hours when case temperature at tc is about 75 °C or lower
MTBF2015.1K hours minimum (Telcordia SR-332); 176.4K hours minimum (MIL-HDBK-217F at 25 °C)

Dimensions & Weight

Height (in.)1.53
Width (in.)2.68
Length (in.)9.61
Weight (lb.)2.7205
Housing constructionMetal housing

Product Documents

Your cart

0 products 0 units

Your cart is empty.

Add products as you browse, then review them here.