Skip to content
MEAN WELL

MEAN WELL HLG-480H-24B 480W 24V Dimmable LED Driver

0 Reviews
SKU
HLG-480H-24B

The MEAN WELL HLG-480H-24B is a 480 W LED driver with a 24 VDC, 20 A constant-voltage/constant-current output. It accepts 90–305 VAC or 127–431 VDC input and supports 0–10 VDC, 10 V PWM, or resistance dimming, with an IP67 rating.

  • 480 W, 24 VDC, 20 A output
  • AC/DC input range
  • Three dimming methods
  • IP67 rating
  • Four protection functions
  • Active power factor correction

Product Overview

The MEAN WELL HLG-480H-24B is a 480 W LED driver with a 24 VDC, 20 A constant-voltage/constant-current output. It accepts 90–305 VAC or 127–431 VDC input and supports 0–10 VDC, 10 V PWM, or resistance dimming, with an IP67 rating.

Technical Specifications

Product information and specifications for the selected item.

SKU: HLG-480H-24B

Product Information

BrandMEAN WELL
MPNHLG-480H-24B
SKUHLG-480H-24B
CategoryLED Drivers & Ballasts

Electrical

Wattage Range480 W
Inrush current35 (cold start at 230 VAC; 1,800 µs pulse width measured at 50% Ipeak)
Overvoltage protection threshold27–33 V
Maximum units per circuit breakerAt 230 VAC on a 16 A breaker: maximum 2 units with a Type B breaker or 3 with a Type C breaker
Typical efficiency94% at 230 VAC; 94.5% at 277 VAC
Total harmonic distortion<20% at ≥40% load on 115/230/277 VAC
Input frequency50/60 Hz
AC input current5 at 115 VAC; 2.45 at 230 VAC; 2 at 277 VAC (typical)
Output ripple and noise200 (maximum) mVp-p
Output tolerance and regulationVoltage tolerance ±1.0%; line regulation ±0.5%; load regulation ±0.5%
Power factor (typical)≥0.98 at 115 VAC; ≥0.97 at 230 VAC; ≥0.95 at 277 VAC, at full load

Compatibility & Operation

Product typeLED Drivers
Protection responseOvercurrent protection at 95–108%; overcurrent/short circuit use constant-current limiting with automatic recovery after fault removal; overvoltage/overtemperature shut down the output and require repowering
Load compatibilityDirect connection to LEDs is suggested; not suitable for use with additional drivers
Protection functionsShort circuit, overvoltage, overcurrent, and overtemperature
Dimming-circuit isolationNot isolated from the secondary output
PWM dimming frequency100–3,000 Hz
Case temperature (tc)90 °C
Dimming level and dim-to-off behaviorAbout 6% minimum; output current is undefined below 6%, but may drop to 0% at 0 V, 0 kΩ, or 0% PWM duty
Fixed-temperature thermal protection110 °C
Mounting surface suitabilitySuitable for direct installation on ordinary combustible material surfaces
Dimming control-port signalSELV
Dimming source current100 (typical) µA
B-type dimming methods0–10 V DC voltage dimming, 10 V PWM dimming, or external-resistor dimming
Ambient operating temperature (ta)40 at 100–200 V AC input; 50 at 200–240 V AC input °C
Dimming control methods0–10 VDC, 10 V PWM signal, or resistance

Dimensions & Weight

Height (in.)1.7244
Width (in.)4.9213
Length (in.)10.315
Weight (lb.)6.173

Product Documents

Your cart

0 products 0 units

Your cart is empty.

Add products as you browse, then review them here.