Skip to content
MEAN WELL

MEAN WELL HLG-600H-12B 12V 480W Dimmable LED Driver

0 Reviews
SKU
HLG-600H-12B

The MEAN WELL HLG-600H-12B is an AC/DC dimmable LED driver with a 12 VDC output rated at 40 A and 480 W. It is specified with an IP67 rating and supports 0-10 VDC, 10 V PWM, or resistance-based dimming.

  • 12 VDC, 40 A, 480 W output
  • 3-in-1 dimming
  • IP67 rating
  • Thermal, short-circuit, and overload protection
  • 11.02 Ă— 5.67 Ă— 1.91 in dimensions
  • Metal case

Product Overview

The MEAN WELL HLG-600H-12B is an AC/DC dimmable LED driver with a 12 VDC output rated at 40 A and 480 W. It is specified with an IP67 rating and supports 0-10 VDC, 10 V PWM, or resistance-based dimming.

Technical Specifications

Product information and specifications for the selected item.

SKU: HLG-600H-12B

Product Information

BrandMEAN WELL
MPNHLG-600H-12B
SKUHLG-600H-12B
UPC / GTIN4711287451688
CategoryLED Drivers & Ballasts

Key Specs

Wattage Range480 W
Voltage12 V

Electrical

Wattage Range480 W
Voltage12 V
Rated output current40 A
Maximum output ripple and noise150 mVp-p
Typical inrush current70 (cold start at 230 VAC; 1000 ÎĽs pulse width at 50% Ipeak)
Rated input current7.0 A
Rated input frequency50/60 Hz
Protection functionsThermal, short-circuit, and overload protection
Remote-off standby consumptionLess than 0.5 when remote off
Leakage currentLess than 0.75 at 277 VAC mA
Efficiency92 at 230 VAC; 92.5 at 277 VAC (typical) %
Total harmonic distortionBelow 20% at loads ≥50% on 115/230 VAC and ≥75% on 277 VAC
Standby auxiliary output voltage5 Vdc
Power factor0.95

Compatibility & Operation

Product typeLED Drivers
PWM dimming frequency100–3,000 Hz
Maximum case temperature (tc)90 °C
Minimum dimming levelAbout 6; output current is undefined below 6 %
Mains connection conditionCan only be used behind a switch; not for permanent connection to mains
Ambient temperature (ta)50 °C
Dimming control methodAdjustable via output cable using 0-10 Vdc, 10 V PWM, or resistance
Use with additional driversNot suitable
Dimming source current100 (typical) ÎĽA
Operating modeConstant voltage
Operating case temperature-40 to +90; refer to output-load vs. temperature derating curve °C

Certifications & Warranty

Ratings & CertificatesROHS
System-level EMC requirementThe final equipment manufacturer must re-qualify EMC compliance for the complete installation

Dimensions & Weight

Height (in.)1.91
Width (in.)5.67
Length (in.)11.02
Weight (lb.)8.6
Housing materialMetal case

Product Documents

Your cart

0 products 0 units

Your cart is empty.

Add products as you browse, then review them here.