Skip to content
nVent CADDY

nVent CADDY H-MSM Side-Mount Conduit/Pipe-to-Flange Clip, 1/8"-1/4" Flange

0 Reviews
SKU
16M24SM

The nVent CADDY H-MSM is a side-mount clip for supporting 1-inch EMT or pipe from beam flanges 1/8–1/4 inch thick. It is made from spring steel with an nVent CADDY Armour finish, features a 360° pivot and snap-close action, and has a 25 lb static load rating. Product specifications list UL and cUL certification marks.

  • 1-Inch EMT/Pipe Size
  • 1/8–1/4-Inch Flange Fit
  • 25 lb Static Load
  • 360° Pivot
  • Spring Steel Construction
  • Hammer-On Flange Attachment

The nVent CADDY H-MSM is a side-mount clip for supporting 1-inch EMT or pipe from beam flanges 1/8–1/4 inch thick. It is made from spring steel with an nVent CADDY Armour finish, features a 360° pivot and snap-close action, and has a 25 lb static load rating. Product specifications list UL and cUL certification marks.

Product Overview

The nVent CADDY H-MSM is a side-mount clip for supporting 1-inch EMT or pipe from beam flanges 1/8–1/4 inch thick. It is made from spring steel with an nVent CADDY Armour finish, features a 360° pivot and snap-close action, and has a 25 lb static load rating. Product specifications list UL and cUL certification marks.

  • 1-Inch EMT/Pipe Size
  • 1/8–1/4-Inch Flange Fit
  • 25 lb Static Load
  • 360° Pivot
  • Spring Steel Construction
  • Hammer-On Flange Attachment

Technical Specifications

Product information and specifications for the selected item.

SKU: 16M24SM

Product Information

BrandnVent CADDY
MPN16M24SM
SKU16M24SM
UPC / GTIN782856112167
CategoryHangers & Supports

Key Specs

Pipe Hangers & Supports TypePipe Beam Clamps
Pipe/Rod Size (in.)1 in

Support & Fit

Pipe Hangers & Supports TypePipe Beam Clamps
Pipe/Rod Size (in.)1 in
Static load rating25 lb
Certification marksUL and cUL
CertificationscUL, UL
Installation ToolHammer only
Supported applicationSupports conduit, pipe, or cable from beam flanges
Compatible flange thickness1/8–1/4 in
Clip assemblySnap together
Pivot Range360 degrees
Permitted environmentNon-corrosive indoor environment only
Clip pivotFull 360°
Installation methodRequires only a hammer
Load rating conditionsStatic conditions; dynamic loading such as wind, water, or seismic loads is not accounted for unless otherwise noted
MaterialSpring steel
Conduit clip latchingSnap the locking tab into the desired latching hole by hand or with Channel Lock pliers
FinishnVent CADDY Armour

Dimensions & Weight

Weight (lb.)0.07

Product Documents

  • Hammer-On Flange Clip & Conduit Clip — Instruction Sheet CFS125_M Installation manual Open / download file
  • Conduit/Pipe to Flange Clip, Side Mount, 1 in EMT, 1/8–1/4 in Flange — 16M24SM Spec sheet Open / download file

Your cart

0 products 0 units

Your cart is empty.

Add products as you browse, then review them here.