Skip to content
nVent CADDY

nVent CADDY K12 Cable/Conduit Clip, 3/4" EMT to 1/8–1/4" Flange

0 Reviews
SKU
K12

The nVent CADDY K12 is a spring-steel cable/conduit clip with an nVent CADDY Armour finish for 3/4 in EMT and 1/8–1/4 in flange attachment. It accommodates listed conduit, cable, and tubing types and installs without tools; conduit mounting is limited to horizontal applications.

  • 3/4-Inch EMT to 1/8–1/4-Inch Flange
  • Conduit, Cable, and Tubing Compatibility
  • Rod, Wire, or Flange Attachment
  • Static Load Ratings
  • Tool-Free Installation
  • Spring Steel, CADDY Armour Finish

The nVent CADDY K12 is a spring-steel cable/conduit clip with an nVent CADDY Armour finish for 3/4 in EMT and 1/8–1/4 in flange attachment. It accommodates listed conduit, cable, and tubing types and installs without tools; conduit mounting is limited to horizontal applications.

Product Overview

The nVent CADDY K12 is a spring-steel cable/conduit clip with an nVent CADDY Armour finish for 3/4 in EMT and 1/8–1/4 in flange attachment. It accommodates listed conduit, cable, and tubing types and installs without tools; conduit mounting is limited to horizontal applications.

  • 3/4-Inch EMT to 1/8–1/4-Inch Flange
  • Conduit, Cable, and Tubing Compatibility
  • Rod, Wire, or Flange Attachment
  • Static Load Ratings
  • Tool-Free Installation
  • Spring Steel, CADDY Armour Finish

Technical Specifications

Product information and specifications for the selected item.

SKU: K12

Product Information

BrandnVent CADDY
MPNK12
SKUK12
UPC / GTIN782856245124
CategoryHangers & Supports

Key Specs

Pipe Hangers & Supports TypePipe Hanging Mount
Pipe/Rod Size (in.)3/4 in

Support & Fit

Pipe Hangers & Supports TypePipe Hanging Mount
Pipe/Rod Size (in.)3/4 in
Static Load 2 (F2)100 lb
Conduit support attachment optionsRod, wire, or flange
Static load on wire or rod (F1)50 lb
Conduit installation orientationHorizontal application only when installing conduit
CertificationsUL, cUL, ITB
Additional compatible usesFlexible metallic tubing, armored cable, portable cables, control tubes and communications cable
Static Load 1 (F1)50 lb
Compatible conduit typesEMT; rigid; ENT; IMT; MC/AC; aluminum conduit
Installation toolsNo installation tools required
Static load on horizontal flange (F2)100 lb
Load rating conditionsStatic conditions only; dynamic loading such as wind, water, or seismic loads is not accounted for
Conduit mounting orientationHorizontal conduit applications only
MaterialSpring steel
Static Load 3 (F3)15 lb
Additional compatible cable and tubing typesFlexible metallic tubing; armored cable; portable cables; control tubes; communications cable
Suspension-wire compatibility listed for K12#10 or #12 wire; #8 or #9 wire
Supported conduit typesEMT, rigid, ENT, IMT, MC/AC and aluminum conduit
Flange attachment methodSqueeze tabs to apply
FinishnVent CADDY Armour
Static load on vertical flange (F3)15 lb
Use environmentNon-corrosive indoor environment only for spring-steel components

Product Documents

Your cart

0 products 0 units

Your cart is empty.

Add products as you browse, then review them here.