The nVent CADDY K8 is a spring-steel cable/conduit clip for 1/2-in EMT or rigid conduit and 12-3 MC/AC cable up to 0.709 in OD. It supports conduit mounting to rod, wire, or flange and is specified for non-corrosive indoor environments.
1/2-in EMT and rigid conduit
12-3 MC/AC cable compatibility
Rod, wire, or flange mounting
Static load ratings by mount
UL and cUL certifications
Spring steel construction
The nVent CADDY K8 is a spring-steel cable/conduit clip for 1/2-in EMT or rigid conduit and 12-3 MC/AC cable up to 0.709 in OD. It supports conduit mounting to rod, wire, or flange and is specified for non-corrosive indoor environments.
The nVent CADDY K8 is a spring-steel cable/conduit clip for 1/2-in EMT or rigid conduit and 12-3 MC/AC cable up to 0.709 in OD. It supports conduit mounting to rod, wire, or flange and is specified for non-corrosive indoor environments.
1/2-in EMT and rigid conduit
12-3 MC/AC cable compatibility
Rod, wire, or flange mounting
Static load ratings by mount
UL and cUL certifications
Spring steel construction
Technical Specifications
Product information and specifications for the selected item.
SKU: K8
Product Information
Brand
nVent CADDY
MPN
K8
SKU
K8
UPC / GTIN
782856245087
Category
Hangers & Supports
Key Specs
Pipe Hangers & Supports Type
Pipe Hanging Mount
Pipe/Rod Size (in.)
1/2 in
Length (in.)
1
Width (in.)
0.4
Support & Fit
Pipe Hangers & Supports Type
Pipe Hanging Mount
Pipe/Rod Size (in.)
1/2 in
Wire compatibility for 12-3 cable
For 12-3 cable, K8 is listed with #8, #9, and #10 wire.
Drop wire/rod and EC311 note
May require dedicated drop wire/rod and EC311; consult local authority
Mounting options
Supports conduit to rod, wire, or flange.
Wire or rod static load (F1)
50 lb
Load rating conditions
Load ratings are for static conditions and do not account for dynamic loading such as wind, water, or seismic loads unless otherwise noted.
Tool requirement
No installation tools required
Maximum outer diameter (OD)
0.71 in
Compatible flange thickness
1/8 - 1/4 in
Environmental limitation
Use only in a non-corrosive indoor environment
Conduit application orientation
For horizontal application only when installing conduit.
Compatible wire-mount sizes
#10 or #12; #8 or #9 AWG
Finish
nVent CADDY Armour
Additional compatible cable and tubing types
Flexible metallic tubing, armored cable, portable cables, control tubes, and communications cable
MC/AC cable size
12-3
Flange installation method
Squeeze tabs to apply for flange mounting
Conduit installation orientation
Horizontal application only when installing conduit
Certifications
cUL, UL
Vertical flange static load (F3)
15 lb
Supported conduit types
EMT, rigid, ENT, IMT, MC/AC, and aluminum conduit
Horizontal flange static load (F2)
100 lb
Material
Spring steel
Mounting interfaces
Supports conduit to rod, wire or flange
Other supported cable and tubing types
Flexible metallic tubing, armored cable, portable cables, control tubes, and communications cable
Maximum supported outer diameter
0.709 in
Dimensions & Weight
Height (in.)
3.4
Width (in.)
0.4
Length (in.)
1
Weight (lb.)
0.02
Product Documents
K-Series Conduit Hangers From Flange, Wire, or Plain Rod — Instruction Sheet CFS115_G
Installation manual
Open / download file
Cable/Conduit Clip, 1/2-in EMT, 1/2-in Rigid, 12-3 MC/AC, 0.709-in Max — K8 Specification Sheet
Spec sheet
Open / download file