Skip to content
nVent CADDY

nVent CADDY M24S Hammer-On Flange Clip, Bottom Mount, 1/8–1/4" Flange, 1/4-20 × 3/8" Stud

0 Reviews
SKU
M24S

The nVent CADDY M24S is a spring-steel, hammer-on bottom-mount flange clip for 1/8–1/4 in beam flanges. It has a captive 1/4-20 × 3/8 in threaded stud and an nVent CADDY Armour finish, and supports boxes, fixtures, or other applications from beam flanges.

  • 1/8–1/4 in flange range
  • Captive 1/4-20 × 3/8 in stud
  • Hammer-on bottom mount
  • Three static load ratings
  • Spring-steel construction
  • nVent CADDY Armour finish

Product Overview

The nVent CADDY M24S is a spring-steel, hammer-on bottom-mount flange clip for 1/8–1/4 in beam flanges. It has a captive 1/4-20 × 3/8 in threaded stud and an nVent CADDY Armour finish, and supports boxes, fixtures, or other applications from beam flanges.

Technical Specifications

Product information and specifications for the selected item.

SKU: M24S

Product Information

BrandnVent CADDY
MPNM24S
SKUM24S
UPC / GTIN782856166382
CategoryHangers & Supports

Key Specs

Pipe Hangers & Supports TypePipe Beam Clamps
Length (in.)1.323
Width (in.)1.772

Support & Fit

Pipe Hangers & Supports TypePipe Beam Clamps
Maximum screw reachThe screw shall not exceed 3/8 in [9.5 mm] from the clip's inside cavity to the flange.
Static Load 325 lb
Coating constructionBi-metallic corrosion protection; inorganic sacrificial basecoat and organic barrier topcoat
Flange thickness1/8–1/4 in
Stud featureCaptive threaded stud; minimizes the need for additional hardware
Stud constructionCaptive threaded stud
Installation toolHammer
MaterialSpring steel
Static Load 1100 lb
Red-rust salt-spray resistance (Armour standard)At least 1,000 h
Static Load 275 lb
FinishnVent CADDY Armour
CertificationcULus
Permitted environmentNon-corrosive indoor environment only
Supported applicationsSupports boxes, fixtures, or other applications from beam flanges
Installation methodRequires only a hammer to install
Static load rating (F1)100 lb
Static load rating (F2)75 lb
Static load rating (F3)25 lb
Load rating limitationStatic load limits; indicated loads should not be combined.
CADDY Armour RoHS statusRoHS compliant

Dimensions & Weight

Height (in.)1.8
Width (in.)1.772
Length (in.)1.323
Weight (lb.)0.05

Product Documents

  • Declaration of Compliance — RoHS Directive 2011/65/EU and Amendment 2015/863/EU Certification compliance Open / download file
  • CFS125_M — Instruction Sheet: Hammer-On Flange Clip & Conduit Clip Installation manual Open / download file
  • Hammer-On Flange Clip, Bottom Mount with Stud, Spring Steel, 1/8–1/4 in Flange — M24S Spec sheet Open / download file

Your cart

0 products 0 units

Your cart is empty.

Add products as you browse, then review them here.