Skip to content
Oatey

Oatey Heavy Duty Clear PVC Cement, 32 fl oz

0 Reviews
SKU
PGHD32

Oatey PGHD32 is a 32 fl oz heavy-bodied PVC cement recommended for potable water, pressure pipe, conduit, and DWV. Its stated compatibility covers all PVC pipe schedules and classes, up to 12 in. with interference fit or 18 in. for DWV applications.

  • PVC pipe/fitting compatibility
  • Potable, pressure, conduit and DWV uses
  • Heavy-bodied PVC cement
  • 32 fl oz size
  • ASTM D2564, NSF 61 and IAPMO
  • Temperature-based set/cure times

Product Overview

Oatey PGHD32 is a 32 fl oz heavy-bodied PVC cement recommended for potable water, pressure pipe, conduit, and DWV. Its stated compatibility covers all PVC pipe schedules and classes, up to 12 in. with interference fit or 18 in. for DWV applications.

Technical Specifications

Product information and specifications for the selected item.

SKU: PGHD32

Product Information

BrandOatey
SKUPGHD32
CategoryTape, Sealants & Consumables

Tape & Appearance

Assembly timingAssemble quickly while cement is fluid
Set/cure time by temperature4–5 at 30–50°F; 3–4 at 50–70°F; 1–2 at 70–90°F minutes
Storage and use temperature range40–110 °F
Cement application methodApply while primer is wet; coat pipe to fitting-hub depth and use a thin coat inside the fitting, avoiding puddling
Handling strength time15 minutes
Joint assemblyPush fully to the fitting bottom using a 1/4-turn motion
Shelf life from manufacture date3 years
Testing after installationWait for correct cure time before system testing; do not test with air or compressed gas
Indoor-emissions standardsUL 2818-2013 Gold Standard for Chemical Emissions; California CDPH Standard Method, Version 1.1 (CA Section 0135)
Recommended applicationsPotable water, pressure pipe, conduit, and DWV
Indoor-emissions certificationUL GREENGUARD Gold certified
Cement bodyHeavy-bodied
ViscosityMinimum 1600 at 73°F ± 2°F cps
Standards and listingsASTM D2564; NSF Standard 61 for PW, DWV and sewer waste; IAPMO listed
Joint hold time30; longer at low temperatures seconds
Low-VOC complianceMeets SCAQMD 1168/316A or BAAQMD Method 40 requirements
FlammabilityHighly flammable liquid and vapor
Primer requirementUse a listed primer before applying cement
Maximum VOC510 g/L
LEED compatibilityCompliant with LEED requirements; may be specified under LEED v4 EQ for Low-Emitting Materials

Dimensions & Weight

Weight (lb.)2.25
PVC pipe/fitting size compatibilityAll schedules and classes; pipe and fittings up to 12 with interference fit, or 18 for DWV applications in.
Density7.86 ± 0.2 lbs/gallon
Applicator size/typeApplicator at least 1/2 the pipe diameter; natural-bristle brush or roller for larger systems
Pipe preparation and fit checkCut ends square, deburr and chamfer; pipe should enter 1/3–2/3 of the way into the fitting

Product Documents

Your cart

0 products 0 units

Your cart is empty.

Add products as you browse, then review them here.