Skip to content
Oatey

Oatey Heavy-Duty Medium-Set Clear PVC Cement, 16 fl oz

0 Reviews
SKU
PGM16

Oatey PGM16 is identified as a 16 fl oz medium-body PVC cement. Its supplied specifications list compatibility with all schedules and classes of PVC pipe and fittings.

  • 16 fl oz size
  • Medium-body PVC cement
  • All PVC schedules and classes
  • Pipe and fitting size limits
  • ASTM D2564, NSF 61, IAPMO
  • Low-VOC compliance

Product Overview

Oatey PGM16 is identified as a 16 fl oz medium-body PVC cement. Its supplied specifications list compatibility with all schedules and classes of PVC pipe and fittings.

Technical Specifications

Product information and specifications for the selected item.

SKU: PGM16

Product Information

BrandOatey
SKUPGM16
CategoryTape, Sealants & Consumables

Key Specs

Length (in.)3.5
Width (in.)3.5

Tape & Appearance

ViscosityMinimum 1600 at 73°F ± 2°F cps
System test timingAllow the correct cure time to pass before testing the plumbing system
Maximum VOC510 g/L
Primer instructionsUse a listed primer; apply inside the fitting hub and to the pipe end, then prime the fitting a second time
Assembly timingAssemble quickly while the cement is fluid
Testing restrictionDo not test with air or compressed gas
CleaningClean pipe and fitting with a pipe cleaner or rag
Pipe-end preparationCut square, deburr, and chamfer pipe ends
Applicator guidanceApplicator at least 1/2 the pipe diameter; natural-bristle brush or roller for larger systems
Interference-fit checkPipe should go 1/3 to 2/3 of the way into the fitting
Compatible PVC pipeAll schedules and classes of PVC pipe and fittings
Body and formulaHeavy-bodied, thick formula that fills gaps in large-diameter pipe and fitting joints
Cement applicationCoat pipe to fitting-hub depth, apply a thin coat inside the fitting, avoid puddling, then apply a second coat to the pipe
Set/cure time by temperature30–50°F: 4–5; 50–70°F: 3–4; 70–90°F: 1–2 minutes
Standards and listingsASTM D2564; NSF Standard 61 for potable water, DWV and sewer waste; IAPMO listed
Low-VOC complianceMeets California SCAQMD 1168/316A or BAAQMD Method 40 requirements
Storage and use temperature40–110 °F
Joint assembly and holdPush fully into fitting with a 1/4-turn motion; hold together 30 seconds, longer at low temperatures
Recommended applicationsPotable water, pressure pipe, conduit, and DWV
Handling strength time15 minutes
Preparation before useStir or shake before use; do not use if jelly-like; do not thin
Shelf life from manufacture date3 years

Dimensions & Weight

Height (in.)4.5
Width (in.)3.5
Length (in.)3.5
Pipe/fitting size limitsUp to 12 with interference fit; 18 for DWV applications in.
Density7.86 ± 0.2 lbs/gallon

Product Documents

Your cart

0 products 0 units

Your cart is empty.

Add products as you browse, then review them here.