Skip to content
Oatey

Oatey Medium-Bodied Clear PVC Cement, 32 oz

0 Reviews
SKU
PGM32

Oatey PGM32 is a 32 fl. oz. medium-body PVC cement recommended for potable water, pressure pipe, conduit and DWV applications. It is specified for all schedules and classes of PVC pipe and fittings up to 6-inch diameter with an interference fit.

  • 32 fl. oz. Size
  • Medium-Body PVC Cement
  • PVC Compatibility to 6 in.
  • Temperature-Based Set/Cure Time
  • ASTM D2564, NSF 61, IAPMO
  • Listed Primer Requirement

Product Overview

Oatey PGM32 is a 32 fl. oz. medium-body PVC cement recommended for potable water, pressure pipe, conduit and DWV applications. It is specified for all schedules and classes of PVC pipe and fittings up to 6-inch diameter with an interference fit.

Technical Specifications

Product information and specifications for the selected item.

SKU: PGM32

Product Information

BrandOatey
SKUPGM32
CategoryTape, Sealants & Consumables

Key Specs

Length (in.)4.5
Width (in.)4

Tape & Appearance

Flammable-liquid hazard classificationCategory 2
Standards and listingsASTM D2564; NSF Standard 61 for PW, DWV and sewer waste; IAPMO listed
Set/cure time by temperature30–50°F: 5–6; 50–70°F: 3–4; 70–90°F: 1–2 minutes
Joint hold time30; hold longer at low temperatures seconds
Primer requirementUse a listed primer before cementing
Joint assemblyAssemble while cement is fluid; push fully into fitting with a 1/4 turn until pipe bottoms
PVC pipe and fitting compatibilityAll schedules and classes, up to 6-inch diameter, with interference fit
HMIS ratingsHealth 2; flammability 3; physical hazard 0
Cement application timingApply cement while primer is still wet, coating the pipe to the fitting-hub depth
Dry-fit insertion depthPipe should enter 1/3 to 2/3 of the way into the fitting
California Proposition 65 warningTetrahydrofuran is identified as a California Proposition 65 cancer warning chemical
Recommended applicationsPotable water, pressure pipe, conduit and DWV
Maximum VOC510 g/L
Pipe-end preparationCut square, deburr and chamfer pipe ends
ApplicatorUse an applicator at least 1/2 the pipe diameter; for larger systems use a natural-bristle brush or roller
Time to good handling strength15 minutes
Cement bodyMedium-bodied
LEEDCompliant with LEED requirements; solvent cements may be specified under LEED v4 EQ for Low-Emitting Materials to obtain points
Pre-use handlingStir or shake before use; do not thin; do not use if jelly-like
Shelf life from manufacture date3 years
Test restrictionDo not test with air or compressed gas
VOC complianceLo-V.O.C.; meets SCAQMD 1168/316A or BAAQMD Method 40
ViscosityMinimum 500 at 73°F ± 2°F cps
Storage/use temperature range40 to 110; special care is needed outside this range to make good joints °F

Dimensions & Weight

Height (in.)6
Width (in.)4
Length (in.)4.5
Weight (lb.)2.291

Product Documents

Your cart

0 products 0 units

Your cart is empty.

Add products as you browse, then review them here.