Skip to content
Superstrut

One-Piece Cable and Pipe Clamp, 1-1/2" Trade Size

0 Reviews
SKU
CPC150

The Superstrut CPC150 is a one-piece, electro-galvanized steel clamp for attaching 1-1/2-in trade-size EMT or rigid conduit, or cable measuring 1.690–1.980 in OD, to strut channels. Its stated static load limit is 200 lb.

  • 1-1/2-Inch EMT and Rigid Conduit
  • Cable OD Range: 1.690–1.980 in
  • Strut-Channel Mounting
  • 200 lb Static Load Limit
  • One-Piece Electro-Galvanized Steel
  • CSA and UL Markings

The Superstrut CPC150 is a one-piece, electro-galvanized steel clamp for attaching 1-1/2-in trade-size EMT or rigid conduit, or cable measuring 1.690–1.980 in OD, to strut channels. Its stated static load limit is 200 lb.

Product Overview

The Superstrut CPC150 is a one-piece, electro-galvanized steel clamp for attaching 1-1/2-in trade-size EMT or rigid conduit, or cable measuring 1.690–1.980 in OD, to strut channels. Its stated static load limit is 200 lb.

  • 1-1/2-Inch EMT and Rigid Conduit
  • Cable OD Range: 1.690–1.980 in
  • Strut-Channel Mounting
  • 200 lb Static Load Limit
  • One-Piece Electro-Galvanized Steel
  • CSA and UL Markings

Technical Specifications

Product information and specifications for the selected item.

SKU: CPC150

Product Information

BrandSuperstrut
MPNCPC150
SKUCPC150
UPC / GTIN616013107065
CategoryFasteners & Hardware

Key Specs

Weight Capacity (lb.)150 - 300
Fastener TypeOther
Fastener MaterialSteel
Fastener PlatingElectro Galvanized Zinc

Capacity & Fastener

Weight Capacity (lb.)150 - 300
Fastener TypeOther
Fastener MaterialSteel
Hook alignment designParallel-hook design keeps conduits and cable square with the strut.
Mounting bolt and drive options5/16-in hex bolt with Robertson-square, Phillips cross-recess and slotted drives; accepts a wrench, screwdriver or nut driver.
Load safety factor4:1
ConstructionOne-piece, heavy-duty construction; ready to install.
Hook arrangementTwo hooks on the same side help keep conduit and cable square with the strut.
Saddle and stirrup designRugged stirrup and wide saddle hold securely without damaging conduit or cable.

Finish & Use

Fastener PlatingElectro Galvanized Zinc
Measurement SystemInches
UL listingUL file E160899
Removal around adjacent clampsCables or pipes can be removed without disturbing neighbouring clamps.
Cable reconfiguration accessCables can be removed without fully disassembling the clamp or disturbing neighboring clamps.
CSA certificationCSA file 3313; Class 441202
CSA/UL marksCSA and UL stamps are identified in markings on each clamp.
Supported media and applicationAttaches EMT, rigid conduit, and cable to strut channels.
Installation procedureHook into the strut channel and hand-tighten, then tighten the bolt; one-hand installation.

Dimensions & Weight

Width (in.)1
Weight (lb.)0.182
Compatible strut channel depth13/16 to 3-1/4 in
Cable O.D. range1.690–1.980 in
Cable outside-diameter range1.690–1.980 in
Conduit trade size1-1/2 for both EMT and rigid conduit; same trade size works for both. in

Product Documents

Your cart

0 products 0 units

Your cart is empty.

Add products as you browse, then review them here.