Skip to content
Reliance Controls

Reliance Controls PB30 30A L14-30 Generator Power Inlet Box

0 Reviews
SKU
PB30

The Reliance Controls PB30 is a 30 A, 125/250 V generator power inlet box with a NEMA L14-30R inlet, NEMA 3R steel enclosure, and spring-loaded weatherproof cover. It has screw terminals and pre-wired grounding.

  • NEMA L14-30R Inlet
  • 30 A, 125/250 V
  • NEMA 3R Steel Enclosure
  • Spring-Loaded Weatherproof Cover
  • Screw Terminals, Pre-Wired Ground
  • 4 Ă— 6 Ă— 3.75 in. Dimensions

Product Overview

The Reliance Controls PB30 is a 30 A, 125/250 V generator power inlet box with a NEMA L14-30R inlet, NEMA 3R steel enclosure, and spring-loaded weatherproof cover. It has screw terminals and pre-wired grounding.

Technical Specifications

Product information and specifications for the selected item.

SKU: PB30

Product Information

BrandReliance Controls
MPNPB30
SKUPB30
UPC / GTIN851890000089
CategoryReceptacles & Outlets

Key Specs

Amperage (A)30
Voltage (V)125/250 V
NEMA ConfigurationNEMA L14-30R
Safety RatingGrounded
Wire Connection TypeScrew Terminal

Electrical Ratings

Amperage (A)30
Voltage (V)125/250 V

Configuration & Wiring

NEMA ConfigurationNEMA L14-30R
Wire Connection TypeScrew Terminal
Inlet terminal screw torque20 inch-pounds
Building-wire requirementsCopper wire only; for conduit runs, AWG #10 minimum and AWG #8 maximum.
Field wiring entryRoute field wiring through one of the cabinet knockouts
Inlet terminal tightening torque20 in-lb
Wire insulation strip length5/8 in
Terminal preparationNo wire insulation in any terminal
Grounding conductor requirementIf conduit is not used or otherwise required, include a separate ground wire
Field wiring requirementCopper wire only; use approved wiring methods
Knockout count and sizesFour combination knockouts with 1/2-inch and 3/4-inch sizes.
Field conductor size#10 minimum, #8 maximum when using conduit AWG

Safety & Compatibility

Safety RatingGrounded
Generator placement precautionKeep an engine-driven generator away from doors and windows to avoid exhaust carbon-monoxide buildup in enclosed areas
Installer qualificationMust be installed by a qualified electrician in compliance with applicable electrical codes
Indoor-use restrictionNot for indoor use

Features & Finish

FeaturesWeatherproof Cover
Color FamilyGray
MaterialSteel
Mounting location and methodMount on the outside of the building using the three holes in the back of the cabinet

Dimensions & Weight

Height (in.)6
Width (in.)4
Length (in.)3.75
Mounting hole countThree mounting holes are provided.

Product Documents

Your cart

0 products 0 units

Your cart is empty.

Add products as you browse, then review them here.