Skip to content
Rely Essentials

Rely Essentials 5600 Hardwired Combination Smoke & CO Alarm

0 Reviews
SKU
5600

The Rely Essentials 5600 is a white, 120 V AC hardwired combination smoke and carbon monoxide alarm with voice alerts. Backup is configured for two replaceable 1.5 V AA batteries. It uses multi-criteria optical smoke sensing and electrochemical CO sensing; the smoke function supports hardwired interconnection, while CO detection is single-station only.

  • Combination smoke and CO alarm
  • 120 V AC hardwired supply
  • Two-AA battery backup
  • Smoke interconnection up to 18 alarms
  • 40 m² maximum detection area
  • Voice alerts

Product Overview

The Rely Essentials 5600 is a white, 120 V AC hardwired combination smoke and carbon monoxide alarm with voice alerts. Backup is configured for two replaceable 1.5 V AA batteries. It uses multi-criteria optical smoke sensing and electrochemical CO sensing; the smoke function supports hardwired interconnection, while CO detection is single-station only.

Technical Specifications

Product information and specifications for the selected item.

SKU: 5600

Product Information

BrandRely Essentials
MPN5600
SKU5600
CategorySafety Supplies

Key Specs

Safety FeaturesOther
Certifications and ListingsCertified Listed
Bundle/SingleSingle Product

Safety & Compliance

Safety FeaturesOther
Certifications and ListingsCertified Listed
CO alarm response time by concentration70 ppm: 60–240 min; 150 ppm: 10–50 min; 400 ppm: 4–15 min
Low-battery replacement intervalReplace within 7 days of the first low-battery warning
Smoke sensor technologyMulti-criteria optical
Maximum AC current30 mA
Maximum detection area40 m² per room
Quick-connector wire colorsLive: black; neutral: white; interconnect: red
Approved replacement battery modelsEnergizer E91 or Gold Peak GN15A, 1.5 V alkaline
AC circuit requirements24-hour, 120 V AC, 60 Hz pure sine wave; cannot be switched, dimmed, or GFCI-interrupted
Mounting locationCeiling or wall
CO sensor technologyElectrochemical
Maximum hardwired interconnection count18 alarms
Backup battery configuration2 replaceable 1.5 V AA batteries
Smoke alarm sensitivity2.08%/ft ±25% OBS
Storage and transport conditions−20 to +50°C; 10–95% RH, non-condensing
Maximum interconnect wiring resistance10 ohms
Interconnect wiring routeRun in the same raceway or cable as AC power wiring
Product life10 years after manufacture
Fresh battery lifeAt least one year under normal conditions
Operating humidity range10–95% RH, non-condensing
Operating temperature range40°F (4.4°C) to 100°F (37.8°C)
Maximum interconnect wire run1000 feet
Audible alarm output≥85 dB at 10 ft; 3.0–3.5 kHz pulsing alarm
Smoke and CO interconnection behaviorCO function is single-station only; smoke function is multi-station when interconnected
Interconnected alarm circuit requirementAll interconnected alarms must be supplied from one power circuit

Package & Appearance

Bundle/SingleSingle Product
Hardware Color FamilyWhite

Dimensions & Weight

Height (in.)1.6
Width (in.)6.1
Length (in.)6.1
Weight (lb.)0.71

Product Documents

Your cart

0 products 0 units

Your cart is empty.

Add products as you browse, then review them here.