Skip to content
RYMCO

RYMCO 3/4" Steel EMT Conduit, 10 ft - 10 ft stick

0 Reviews
SKU
3/4" EMT CONDUIT 10 FT

RYMCO 3/4-in steel EMT conduit is supplied in 10-ft lengths, with a 0.922-in outside diameter and 0.049-in nominal wall thickness. It has a hot-dip galvanized exterior with C Coat and a FreedomCoat interior layer.

  • 3/4-in Trade Size
  • 10-ft Conduit Length
  • Steel EMT Construction
  • NEC 358.60 Grounding Use
  • Galvanized Exterior with C Coat
  • FreedomCoat Interior Layer

Product Overview

RYMCO 3/4-in steel EMT conduit is supplied in 10-ft lengths, with a 0.922-in outside diameter and 0.049-in nominal wall thickness. It has a hot-dip galvanized exterior with C Coat and a FreedomCoat interior layer.

Technical Specifications

Product information and specifications for the selected item.

SKU: 3/4" EMT CONDUIT 10 FT

Product Information

BrandRYMCO
MPN3/4" EMT CONDUIT 10 FT
SKU3/4" EMT CONDUIT 10 FT
CategoryConduit

Technical Details

Conduit TypeEMT
Trade Size (in.)3/4 in
MaterialSteel
Metallic/Non-MetallicMetallic
Conduit Length (ft.)10
Length (in.)120

Compliance

NEC codeNEC Article 358
UL standardUL 797, File E172409
ANSI standardANSI C80.3
CSA standardCSA C22.2 No. 83
NEC complianceNEC Article 358

Coatings

Exterior coatingHot-dipped galvanized exterior with a special high-grade zinc coating; C Coat for extra corrosion protection.
Interior coatingFreedomCoat® interior layer for rust prevention and easier wire pulling and pushing.

Construction

Seam construction and inspectionContinuously welded seams, inspected and tested for interior defects.
Exterior corrosion protectionHot-dip galvanized high-grade zinc exterior; C Coat adds corrosion protection
Wall constructionUniform wall thickness.

Performance testing

ASTM B-117 test resultMore than 500 hours
ASTM D-4585 test resultMore than 500 hours

Application

Installation locationsIndoor or outdoor; wet or dry; exposed or concealed installations
Installation environmentsSuitable for indoor or outdoor installation in wet or dry locations, exposed or concealed, in a variety of atmospheric conditions.
Hazardous-location useMay be used in hazardous locations under NEC Articles 502, 503 and 504 if not subject to severe physical damage during and after installation.

Dimensions

Nominal wall thickness0.049 in
Nominal inside diameter0.824 in

Electrical

Equipment groundingRecognized as an acceptable equipment grounding conductor under NEC Section 358.60.
Grounding useRecognized under NEC Section 358.60 as an acceptable equipment grounding conductor
Electromagnetic shieldingOffers shielding against electromagnetic fields generated during normal operation of electrical installations.
EMI shieldingShields against electromagnetic fields generated during normal electrical operation

Installation

BendabilityRigid conduit that can be bent with a conduit bender
Fitting compatibilityInstalled with couplings and fittings secured by setscrew or compression-type fasteners

Product Documents

Your cart

0 products 0 units

Your cart is empty.

Add products as you browse, then review them here.