Skip to content
Santronics

Santronics Ultimate AC Sensor Non-Contact Voltage Tester, 50–1000VAC

0 Reviews
SKU
3000

The Santronics Ultimate AC Sensor is a non-contact tester for 50–1000 VAC. It senses the electric field through insulation and signals AC presence with a bright red probe-tip LED and audible alert.

  • 50–1000 VAC Detection Range
  • Non-Contact Insulation Sensing
  • Red Probe-Tip LED and Audible Alert
  • CAT IV Safety Category
  • Requires Two AAA Batteries
  • No On/Off Switch

Product Overview

The Santronics Ultimate AC Sensor is a non-contact tester for 50–1000 VAC. It senses the electric field through insulation and signals AC presence with a bright red probe-tip LED and audible alert.

Technical Specifications

Product information and specifications for the selected item.

SKU: 3000

Product Information

BrandSantronics
MPN3000
SKU3000
UPC / GTIN727559030004
CategoryTools

Key Specs

Bundle/SingleSingle Product
Color FamilyOrange
Height (in.)0.56
Width (in.)0.7

Package & Appearance

Bundle/SingleSingle Product
Color FamilyOrange
CleaningClean with a damp cloth.
AC-present indicationWhen AC voltage is present, the probe-tip LED glows bright red and an audio alert sounds.
Relative humidity limits95% at 0–30°C; 75% at 30–40°C; 45% at 40–55°C % RH
Required batteries2 AAA, 1.5 V alkaline batteries
Sensing methodSenses the electric field through insulation without touching the conductor
Safety categoryCAT IV
Altitude3,000 m
Defective-ground indicationImproper or defective grounding on metal-enclosed equipment produces a steady red probe-tip glow.
Probe-tip materialPlastic
Pre-use functional checkTest on a known live circuit before each use.
Wet indoor Romex detection limitationWet indoor Romex can shield the electric field, so the sensor may not glow even when voltage is present.
Static-charge discriminationDistinguishes static charge from AC current.
Detection methodNon-contact detection; circuit disconnection and current flow are not required to locate voltage.
AC voltage detection range50–1000 VAC
Power switchNo switch required
Circuit-break indicationProbe illumination stops at a break in the circuit or wire.
Application rangeLow-voltage signal, telecommunications/electronics, appliances, distribution-level systems, and fixed installations
Relative humidity by temperature95 at 0–30°C; 75 at 30–40°C; 45 at 40–55°C % RH
HandlingHold by the body and keep fingers away from the tip.
Operating temperature-20 to +55 °C
Supported systemsInsulated wires, wall receptacles, fuses, junction boxes, switches, and other voltage-carrying electrical systems
Body, probe, and cap materialNon-conductive, high-impact nonflammable polycarbonate
Battery supply2 replaceable AAA alkaline batteries
CAT rating / maximum voltageCAT IV; maximum 1000 VAC

Dimensions & Weight

Height (in.)0.56
Width (in.)0.7
Length (in.)5.85

Product Documents

Your cart

0 products 0 units

Your cart is empty.

Add products as you browse, then review them here.