Skip to content
Schneider Electric

Schneider Electric TeSys D 25A 3-Pole Contactor, 120VAC Coil, 1NO Auxiliary

0 Reviews
SKU
LC1 D2510G7

The Schneider Electric TeSys D LC1 D2510G7 is a three-pole motor-control contactor rated 25 A AC-3, with a 120 VAC 50/60 Hz coil and screw-clamp power terminals.

  • 25 A AC-3 rating
  • Three normally open main poles
  • 120 VAC, 50/60 Hz coil
  • 40 A lighting-load ratings
  • One NO auxiliary contact
  • Screw-clamp power terminals

Product Overview

The Schneider Electric TeSys D LC1 D2510G7 is a three-pole motor-control contactor rated 25 A AC-3, with a 120 VAC 50/60 Hz coil and screw-clamp power terminals.

Technical Specifications

Product information and specifications for the selected item.

SKU: LC1 D2510G7

Product Information

BrandSchneider Electric
MPNLC1 D2510G7
SKULC1 D2510G7
UPC / GTIN6410038854485
CategoryLighting Contactors

Key Specs

Number of Poles3
Coil Voltage120 VAC

Switching & Electrical

Number of Poles3
Coil Voltage120 VAC
Motor horsepower at 115 V AC, single-phase2 hp
AC-1 maximum operational power at 380/400 V, ambient ≤55 °C25 kW
Terminal connection styleScrew-clamp terminals
LC1D25/D32/D38 power-terminal tightening torque2.5 N·m
UL/CSA ballast lighting rating at 600 V40 A
LC1D25/D32/D38 power-terminal wire stripping length10 mm
Definite-purpose hermetic refrigeration compressor rating, 3-phase, all lines broken (UL/CSA-marked products only)FLA 25 A; LRA 150 A at 240 V, 125 A at 480 V, and 100 A at 600 V
Motor horsepower at 230 V AC, single-phase3 hp
Maximum power consumptionLower than 9.5 VA
Main terminal markingsLine: 1/L1, 3/L2, 5/L3; load: 2/T1, 4/T2, 6/T3
Elevator-duty horsepower ratings (UL/CSA-marked products, except DC-coil versions)3 hp at 230 V single-phase; 5 hp at 200/208 V, 7.5 hp at 230 V, 15 hp at 460 V, and 20 hp at 575 V three-phase
LC1D25/D32/D38 terminal conductor gauge6–14 (copper conductors, 75 °C) AWG
AC-1 operational current for open-mounted device40 A at ambient ≤55 °C
Maximum resistive-load current (AC-1)40 A
Power-terminal protectionTouch-safe cable clamps supplied
Motor horsepower at 230 V AC, three-phase7.5 hp
Motor horsepower at 575 V AC, three-phase20 hp
Power-terminal conductor cross-section, one listed connection configuration1–10 mm²
UL/CSA tungsten lighting rating at 480Y/277 V40 A
EMC environment B installation noteMitigation measures may be required to avoid unwanted disturbance
GB 21518 energy-efficiency gradeGrade 2
AC-3 rated motor power at 660/690 V (IEC, θ ≤55 °C)15 kW
Motor horsepower at 200 V AC, three-phase7.5 hp

Product Documents

  • LC1D 9 to 38 A AC/DC Contactors with Screw Clamp Terminals — Instruction Sheet Installation manual Open / download file
  • TeSys D-Line Contactors, Enclosed Starters, Overload Relays, and Accessories (Catalog 04, File 8502) Spec sheet Open / download file

Your cart

0 products 0 units

Your cart is empty.

Add products as you browse, then review them here.