Skip to content
SENSORWORX

SensorWorx SWX-950 Wireless Power Pack Load Controller, Standard Non-Dimming, 120–277VAC

0 Reviews
SKU
SWX-950

The SENSORWORX SWX-950 is a wireless, standard non-dimming power pack load controller with a 120–277 VAC supply input. It supports occupancy and vacancy operation, is compatible with wireless sensors, photocells, and wall stations, and supports up to 50 remote devices.

  • 120–277 VAC Supply Input
  • 16 A LED Driver Rating
  • Standard Non-Dimming Model
  • Up to 50 Remote Devices
  • Sensor, Photocell, and Wall-Station Compatibility
  • Occupancy, Vacancy, and Photocell Modes

The SENSORWORX SWX-950 is a wireless, standard non-dimming power pack load controller with a 120–277 VAC supply input. It supports occupancy and vacancy operation, is compatible with wireless sensors, photocells, and wall stations, and supports up to 50 remote devices.

Product Overview

The SENSORWORX SWX-950 is a wireless, standard non-dimming power pack load controller with a 120–277 VAC supply input. It supports occupancy and vacancy operation, is compatible with wireless sensors, photocells, and wall stations, and supports up to 50 remote devices.

  • 120–277 VAC Supply Input
  • 16 A LED Driver Rating
  • Standard Non-Dimming Model
  • Up to 50 Remote Devices
  • Sensor, Photocell, and Wall-Station Compatibility
  • Occupancy, Vacancy, and Photocell Modes

Technical Specifications

Product information and specifications for the selected item.

SKU: SWX-950

Product Information

BrandSENSORWORX
MPNSWX-950
SKUSWX-950
CategoryLighting Contactors

Switching & Electrical

Energy code complianceCan be used to meet ASHRAE 90.1, IECC, and Title 24 energy code requirements
Compliance markscULus listed; RoHS, BAA, and TAA compliant
Wireless securityWireless data is encrypted
AC load rating — electronic ballast and LED driver16 A at 120–277 VAC
Wireless device capacityUp to 50 remote devices
Relative humidity0–95, non-condensing; indoor use only % RH
Radio regulatory complianceFCC Part 15 and ISED Canada licence-exempt RSS compliant
Minimum supply wire size14 or larger (90°C rated) AWG
Occupancy time delay options1, 5, 10, 15, 20, 30 minutes; 1, 2, 4, 8 hours
Wireless range80 ft unobstructed line-of-sight; 40 ft with obstruction
Relay switchingZero-cross switching
Chase nipple wiring classificationCircuits exiting the chase nipple must be Class 1 circuits
Operating modesOccupancy and vacancy
Wireless device compatibilitySensors, photocells, and wall stations
DC load ratings16 A at 28 VDC maximum; 1 A at 5 VDC minimum
Mounting requirementsAttach to electrical enclosures with 1/2-in knockouts; do not mount inside a metal junction box
Operating temperature32°F to 122°F (0°C to 50°C), standard
AC load rating — general-purpose, tungsten, magnetic ballast16 A at 120–277 VAC
Motor load1 HP
Photocell control modesOn/Off/Inhibit
Wireless communication typeTransmit and receive
Plenum ratingUL 2043
Wireless frequency915 ISM band MHz
Minimum separation from the human bodyAt least 20 cm

Dimensions & Weight

Height (in.)3
Width (in.)2.25
Length (in.)1.88
Weight (lb.)0.375

Product Documents

Your cart

0 products 0 units

Your cart is empty.

Add products as you browse, then review them here.