Skip to content

Siemens 2.5" HS-Type Load Center Rain Hub

0 Reviews
SKU
ECHS250

The Siemens ECHS250 is a 2.5-inch aluminum HS-type rain hub specified for N3R PL and ES and small-circuit load centers, except model W0204ML1060. Its stated environmental application is outdoor, Type 3R.

  • 2.5-Inch HS-Type Rain Hub
  • N3R PL/ES and Small-Circuit Compatibility
  • Outdoor Type 3R Application
  • Aluminum Construction
  • ANSI, CSA, and UL Status
  • Interchangeable Screw Mount

The Siemens ECHS250 is a 2.5-inch aluminum HS-type rain hub specified for N3R PL and ES and small-circuit load centers, except model W0204ML1060. Its stated environmental application is outdoor, Type 3R.

Product Overview

The Siemens ECHS250 is a 2.5-inch aluminum HS-type rain hub specified for N3R PL and ES and small-circuit load centers, except model W0204ML1060. Its stated environmental application is outdoor, Type 3R.

  • 2.5-Inch HS-Type Rain Hub
  • N3R PL/ES and Small-Circuit Compatibility
  • Outdoor Type 3R Application
  • Aluminum Construction
  • ANSI, CSA, and UL Status
  • Interchangeable Screw Mount

Technical Specifications

Product information and specifications for the selected item.

SKU: ECHS250

Product Information

BrandSiemens
MPNECHS250
SKUECHS250
UPC / GTIN783643455139
CategoryBox Accessories

Key Specs

MaterialAluminum
Height (in.)3
Width (in.)5

Accessory Details

MaterialAluminum
Standards and listingsANSI specified; CSA certified; UL listed
Environmental applicationOutdoor, Type 3R
Compatible load-center familiesN3R PL & ES and small-circuit load centers, excluding W0204ML1060
Load-center applicationN3R PL & ES, Small Circuit Load Centers (except W0204ML1060)
Mounting screw tightening torque35-40 lb-in
Mounting screw selectionFor X = 3 9/16 in., use two hub-supplied screws in the back positions and two enclosure-bag screws in the front; for X < 3 9/16 in., use all four hub-supplied screws.
Mounting configurationInterchangeable screw mount
Suitable safety-switch ratings60–200 general duty; 30–200 heavy duty
Gasket installationUse the supplied gasket between the enclosure head and hub when provided. If a cover plate and gasket are factory installed, remove the cover plate and reuse the gasket and hardware. No gasket is required if none is provided with the device.
Side-hinged door screw noteShort screws are not required on side-hinged doors.
Suitability for operationResidential
Power isolation before installationTurn off and lock off the power supplying the load center before working inside.

Dimensions & Weight

Height (in.)3
Width (in.)5
Length (in.)3.9
Weight (lb.)0.52

Product Documents

Your cart

0 products 0 units

Your cart is empty.

Add products as you browse, then review them here.