Skip to content

Siemens 30A 3-Pole 240V Fusible General-Duty Safety Switch, Solid Neutral, Type 1 Enclosure

0 Reviews
SKU
GF321NA

The Siemens GF321NA is a 30 A, 3-pole fusible general-duty safety switch with a solid neutral and Type 1 (NEMA 1) enclosure. It is suitable for use as service equipment, with maximum system voltages of 240 VAC or 250 VDC.

  • 30 A, 3-Pole, 240 VAC
  • Fusible, Three-Fuse Configuration
  • Solid Neutral
  • Type 1 (NEMA 1) Enclosure
  • UL Listed
  • Motor Horsepower Ratings

Product Overview

The Siemens GF321NA is a 30 A, 3-pole fusible general-duty safety switch with a solid neutral and Type 1 (NEMA 1) enclosure. It is suitable for use as service equipment, with maximum system voltages of 240 VAC or 250 VDC.

Technical Specifications

Product information and specifications for the selected item.

SKU: GF321NA

Product Information

BrandSiemens
MPNGF321NA
SKUGF321NA
UPC / GTIN00804766753527
CategoryDisconnects & Safety Switches

Key Specs

Maximum Amperage (A)30
Phase Type3 Phase
Disconnect TypeSafety Switch
NEMA Enclosure RatingNEMA 1

Switch Ratings

Maximum Amperage (A)30
Phase Type3 Phase
Short-circuit rating with Class K/H fuses10,000 AIC with Class K or H fuses.
Continuous load limitFor non-motor circuits, continuous load current must not exceed 80% of the fuse rating.
Motor starting fuse guidanceMotor starting current above the standard horsepower rating may require fuses with appropriate time-delay characteristics.
AC short-circuit withstandAt 240 VAC: up to 10,000 A RMS symmetrical with Class H/K fuses or a 10,000 A UL-listed circuit breaker; up to 100,000 A with Class R fuses and HR21A installed.
DC short-circuit conditionWith DC-rated fuses, circuit capacity is limited by the fuse’s marked DC interrupt rating and voltage, up to 10,000 A at 250 VDC.
Short-circuit rating with Class R fusesUp to 100,000 A RMS symmetrical at 240 V AC maximum, when Class R fuses and the proper fuse-clip kit are installed.
Load-break ratingLoad-break rated.
Maximum system voltage240 VAC maximum; 250 VDC maximum.
Horsepower ratings240 VAC 1-phase: 1.5 hp standard / 3 hp maximum; 240 VAC 3-phase: 3 hp standard / 7.5 hp maximum; 250 VDC: 5 hp standard.

Disconnect Configuration

Disconnect TypeSafety Switch
FusedFused
Pole connection for single-phase/DC applicationsUse the outer two poles for the listed 1-phase AC and DC horsepower applications.
Fuse type guidanceRenewable-link fuses are not recommended.
Line/load lug tightening torque35 lb-in for 14–10 AWG; 40 lb-in for 8 AWG.
Padlocking provisionsPadlocking provisions allow the cover to be locked closed or the switch to be locked in the OFF position.
Switching blade designVisible-blade, double-break switching design.
Conductor and lug wire rangesWith NEC wire-bending space: line, load, and standard neutral #14–8 AWG; line/load lugs #14–2 AWG; neutral lugs #14–4 AWG.
Cover interlockThe 30 A general-duty model has no cover interlock.
Conductor material and temperature ratingUse copper or aluminum wire rated 60°C or 75°C.
Terminal and conductor rangesLine/load: #14–#8 AWG wire-bending range; lugs accept #14–#2 AWG. Neutral: #14–#8 AWG wire-bending range; lugs accept #14–#4 AWG.
Wire termination torqueLine/load: 35 lb-in for #14–#10 AWG and 40 lb-in for #8 AWG; neutral: 20 lb-in for #14–#10 AWG and 25 lb-in for #8 AWG.

Enclosure & Certifications

NEMA Enclosure RatingNEMA 1
Certifications and ListingsUL Listed
Enclosure material and thicknessCold-rolled steel, 0.045 in thick.
Service equipment suitabilitySuitable for use as service equipment.
Enclosure finishANSI Grey #61 paint.

Dimensions & Weight

Height (in.)8.56
Width (in.)5.44
Length (in.)3.96
Weight (lb.)3
Internal wire-bend spaceLine wire bend: 1.5 in; load wire bend: 2.0 in.
Conduit knockout layoutTop and bottom concentric knockouts for 1/2-, 3/4-, and 1-in conduit.

Product Documents

Your cart

0 products 0 units

Your cart is empty.

Add products as you browse, then review them here.