Skip to content

Siemens 60A 3-Pole/4-Wire Fused General-Duty Safety Switch, 240VAC, Solid Neutral, Type 3R

0 Reviews
SKU
GF322NRA

The Siemens GF322NRA is a 60 A, three-pole, 240 V fused outdoor safety switch with quick-make-and-break action and a double-break visible-blade design. It is suitable for service-entrance equipment; at 240 V AC, its short-circuit rating is up to 100,000 A RMS symmetrical with Class R fuses and a properly installed HR22A kit.

  • 60 A, 3-pole, 240 V rating
  • Conditional 100 kA short-circuit rating
  • Three-phase horsepower rating
  • Service-entrance suitability
  • Line/load and neutral lug ranges
  • Type HA outdoor hub compatibility

Product Overview

The Siemens GF322NRA is a 60 A, three-pole, 240 V fused outdoor safety switch with quick-make-and-break action and a double-break visible-blade design. It is suitable for service-entrance equipment; at 240 V AC, its short-circuit rating is up to 100,000 A RMS symmetrical with Class R fuses and a properly installed HR22A kit.

Technical Specifications

Product information and specifications for the selected item.

SKU: GF322NRA

Product Information

BrandSiemens
SKUGF322NRA
CategoryDisconnects & Safety Switches

Key Specs

Maximum Amperage (A)60
Phase Type3 Phase
Disconnect TypeSafety Switch
NEMA Enclosure RatingNEMA 3R

Switch Ratings

Maximum Amperage (A)60
Phase Type3 Phase
Continuous-load fuse limitFor non-motor circuits, continuous load current must not exceed 80% of the fuse rating % of fuse rating
Short-circuit rating with Class R fusesSuitable for circuits up to 100,000 A RMS symmetrical at 240 V AC with Class R fuses and the HR22A kit properly installed
Horsepower rating at 240 VAC, three-phase7.5 standard with standard fuses; 15 maximum with time-delay fuses HP
Horsepower rating at 240 VAC, single-phase3 standard with standard fuses; 10 maximum with time-delay fuses HP
Motor-starting fuse guidanceMotor starting current above the standard horsepower rating may require fuses with appropriate time-delay characteristics
DC fuse protection limitFor DC use, circuit capability must not exceed the fuse-marked DC interrupting rating and voltage; maximum 10,000 A at 250 V DC
Short-circuit current limitsAt 240 VAC, maximum available fault current is 10 kA RMS symmetrical with Class H/K fuses or a UL-listed circuit breaker rated 10 kA; up to 100 kA RMS symmetrical with Class R fuses and the HR22A Class R fuse-clip kit properly installed. At up to 250 VDC, use DC-rated fuses; fault current must not exceed the fuse’s marked DC interrupting rating and is limited to 10 kA.
Horsepower rating at 250 V DC10 standard at 250 V DC; use the outer two poles HP
Short-circuit rating with Class K/H fuses10,000 with Class K or H fuses AIC

Disconnect Configuration

Disconnect TypeSafety Switch
FusedFused
Fuse clip constructionSpring-type copper fuse clips
Padlocking provisionsPadlocking provisions allow the cover to be locked closed or the switch to be locked in the OFF position
Neutral conductor and lug rangeLug range: 14–4 AWG; NEC wire-bending range: 14–6 AWG
Neutral lug tightening torque20 for 14–10 AWG; 25 for 8 AWG; 35 for 6 AWG lb-in
Line/load lug tightening torque35 for 14–10 AWG; 40 for 8 AWG; 45 for 6 AWG lb-in
Fuse compatibility noteRenewable link fuses are not recommended
Line/load conductor and lug rangeLug range: 14–2 AWG; NEC wire-bending range: 14–6 AWG
Switching mechanismQuick-make-and-break switching action with a double-break visible-blade design
Conductor material and temperature ratingUse 75°C copper wire only
Cover interlockNo cover interlock

Enclosure & Certifications

NEMA Enclosure RatingNEMA 3R
Certifications and ListingsUL Listed
Enclosure material and finishGalvanized steel, 0.045 in thick, with ANSI Grey #61 paint finish
Hub provision and compatibilityCompatible with Type HA outdoor hubs sized 3/4, 1, and 1-1/4 in; use the provided closure-plate screws to mount hubs
Service-equipment suitabilitySuitable for use as service entrance equipment
Conduit knockout configurationBottom-only entry; concentric knockouts for 1/2, 3/4, and 1 in conduit

Dimensions & Weight

Height (in.)10.29
Width (in.)6.42
Length (in.)4.24
Weight (lb.)4.012
Line/load wire-bending space2.0 in

Product Documents

Your cart

0 products 0 units

Your cart is empty.

Add products as you browse, then review them here.