Skip to content

Siemens BoltShield QSPD-Base 2-Pole 120/240V Plug-In Surge Protective Device

0 Reviews
SKU
QSPD2A035B

The Siemens BoltShield QSPD-Base (QSPD2A035B) is a 2-pole plug-in surge protective device for 120/240V single-phase, 3-wire systems; 208Y/120V single-phase, 3-wire operation is also listed. It fits Siemens QP-type load-center locations and uses a thermally protected, monolithic distribution-grade MOV. Stated ratings are 35 kA surge current per phase, 22 kA SCCR, and 20 kA nominal discharge current.

  • 2-Pole Plug-In Connection
  • Siemens QP Load-Center Fit
  • 35 kA Surge Current per Phase
  • 22 kA Short-Circuit Rating
  • 20 kA Nominal Discharge Current
  • Green/Red Mechanical Flags

Product Overview

The Siemens BoltShield QSPD-Base (QSPD2A035B) is a 2-pole plug-in surge protective device for 120/240V single-phase, 3-wire systems; 208Y/120V single-phase, 3-wire operation is also listed. It fits Siemens QP-type load-center locations and uses a thermally protected, monolithic distribution-grade MOV. Stated ratings are 35 kA surge current per phase, 22 kA SCCR, and 20 kA nominal discharge current.

Technical Specifications

Product information and specifications for the selected item.

SKU: QSPD2A035B

Product Information

BrandSiemens
MPNQSPD2A035B
SKUQSPD2A035B
UPC / GTIN804766954863
CategorySurge Protective Devices

Key Specs

Surge Current Capacity (kA)35
Surge Protector Max Amperage (A)35
Connection typeBreaker

Surge Ratings

Surge Current Capacity (kA)35
Surge Protector Max Amperage (A)35
Surge suppression elementMonolithic distribution grade MOV
Short-circuit current rating (SCCR)22 kA
Operating frequency range0-415 Hz
Indicator typeMechanical flags are visual and do not illuminate; they are not LED lights.
Additional supported voltage system208Y/120V, 1Ø, 3W
Operating temperature range-25 to +60 °C
MOV thermal protectionThermally protected MOV
Humidity range0-95, non-condensing %
Surge element constructionMonolithic distribution grade MOV
Repetitive impulse endurance5000 hits
Protection modesL-N or L-G; L-L
Failure indicator statusGreen flag indicates operational status; red flag after MOV failure means replace the unit.
Nominal discharge current (In)20 kA
Voltage protection rating, L-N/L-G700 V
Additional compatible system208Y/120V, 1Ø, 3W
Response time<1 ns
Maximum continuous operating voltage (MCOV)150 V
Mechanical failure indicatorGreen = operational; red = MOV failure

Connection & Certifications

Connection typeBreaker
Certifications and ListingsANSI Compliant, cULus Listed, ISO 9001
Meter-combo limitationSome half-bus meter combos are not compatible.
Pigtail conductorPre-wired #14 AWG, solid copper stranded
Neutral pigtail installationConnect the white pigtail to the neutral bus bar on single-phase installations; keep the wire as straight and short as possible.
Neutral pigtail torque5-7 lb-in
Load-center compatibilityFits any location that accepts a Siemens 2-pole QP-type breaker
QP breaker compatibilityFits Siemens products that accept a 2-pole or 3-pole QP-type breaker.

Dimensions & Weight

Height (in.)3.146
Width (in.)1.984
Length (in.)2.571
Weight (lb.)0.36

Product Documents

  • SPEEDFAX™ Product Catalog, Section 1 — BoltShield™ Surge Protective Devices Other Open / download file
  • BoltShield Surge Protection Device — Limited Warranty Terms, Conditions and Limitations Warranty Open / download file
  • QSPD2A035B Series Installation Instructions (2020 edition) Installation manual Open / download file
  • QSPD2A035B Series Installation Instructions — BoltShield™ QSPD Series for Loadcenters Installation manual Open / download file
  • BoltShield™ Surge Protective Devices — QSPD Series for Load Centers, Base Model Spec sheet Open / download file

Your cart

0 products 0 units

Your cart is empty.

Add products as you browse, then review them here.