Skip to content

Siemens GF322N VBII 60A 3P Fused General-Duty Safety Switch, 240VAC, Type 1 Indoor

0 Reviews
SKU
GF322NA

The Siemens GF322NA is a 60 A, three-pole, 240 V fused indoor safety switch with published single- and three-phase motor horsepower ratings and suitability for use as service entrance equipment.

  • 60 A, 3-pole, 240 V
  • Motor horsepower ratings
  • Service-entrance equipment suitability
  • Fuse-dependent short-circuit ratings
  • Conductor range and wire type
  • Padlock provisions

The Siemens GF322NA is a 60 A, three-pole, 240 V fused indoor safety switch with published single- and three-phase motor horsepower ratings and suitability for use as service entrance equipment.

Product Overview

The Siemens GF322NA is a 60 A, three-pole, 240 V fused indoor safety switch with published single- and three-phase motor horsepower ratings and suitability for use as service entrance equipment.

  • 60 A, 3-pole, 240 V
  • Motor horsepower ratings
  • Service-entrance equipment suitability
  • Fuse-dependent short-circuit ratings
  • Conductor range and wire type
  • Padlock provisions

Technical Specifications

Product information and specifications for the selected item.

SKU: GF322NA

Product Information

BrandSiemens
SKUGF322NA
CategoryCircuit Breakers

Key Specs

Maximum Amperage (A)60
Voltage240 V AC
Neutral Connection TypeNeutral

Electrical Ratings

Maximum Amperage (A)60
Voltage240 V AC
Horsepower ratingsSingle-phase: 3 HP standard / 10 HP maximum; three-phase: 7.5 HP standard / 15 HP maximum. Standard ratings use standard fuses; maximum ratings use time-delay fuses.
Operating ambient temperature range-29 to 49 °C
Short-circuit rating with Class R fuses100,000 RMS symmetrical with Class R fuses and HR612 fuse-clip kit properly installed; 240 V maximum
DC short-circuit suitabilityAvailable fault current must not exceed the DC interrupting rating marked on the fuse, up to 10,000 A at 250 V DC
Continuous-load fuse sizingFor non-motor circuits, continuous load current must not exceed 80% of the fuse rating
Frequency rating60 Hz
Short-circuit rating with Class H/K fuses10,000 RMS symmetrical with Class H or K fuses; 240 V maximum

Breaker Configuration

Neutral Connection TypeNeutral
Series TypeVBII
Typical mechanical service life10,000 typical cycles
Pole-use installation noteUse the outer two poles for the footnoted applications
Line, load and main-neutral conductor range#14–3 AWG
Cover interlockSingle cover interlock
Blade constructionVisible blade with double-break action
Switching mechanismQuick-make and quick-break switching action
Lug mounting torque24 lb-in
Service-ground conductor range#14–4 AWG
Terminal wire-tightening torque#14–10 AWG: 35; #8 AWG: 40; #6–4 AWG: 45; #3 AWG: 50 lb-in
Enclosure constructionCold-rolled steel, 0.054 in thick (17 gauge)
Enclosure finishANSI Grey #61 paint
Conductor material and temperature ratingCopper or aluminum wire rated 60°C / 75°C
Padlocking provisionsPadlockable cover latch and multiple padlock provisions on handle
Operating actionSingle throw

Pack & Smart Features

Bundle/SingleSingle Product
Pack OptionsSingle Item

Certifications

Certifications and ListingsUL Listed
Service equipment suitabilitySuitable for use as service entrance equipment

Dimensions & Weight

Height (in.)15.45
Width (in.)8.7
Length (in.)8.63
Weight (lb.)12.236
Conduit knockout sizesConcentric: 0.75 and 1.00; tangential: 0.50, 0.75 and 1.00 in
Wire-bending spaceLine side: 3.02; load side: 4.61

Product Documents

Your cart

0 products 0 units

Your cart is empty.

Add products as you browse, then review them here.