Skip to content

Siemens HF365RA 400A 600V 3-P Fusible Heavy-Duty Safety Switch, Type 3R Outdoor

0 Reviews
SKU
HF365RA

The Siemens HF365RA is a three-pole, fusible, outdoor-rated heavy-duty safety switch identified for 600 V and specified without a neutral bar. The specification states that it is suitable for use as service-entrance equipment.

  • Three-Pole Fusible Switch
  • 600 V Rating
  • Outdoor Rated
  • Service-Entrance Suitability
  • No Neutral Bar
  • Interrupting Rating

The Siemens HF365RA is a three-pole, fusible, outdoor-rated heavy-duty safety switch identified for 600 V and specified without a neutral bar. The specification states that it is suitable for use as service-entrance equipment.

Product Overview

The Siemens HF365RA is a three-pole, fusible, outdoor-rated heavy-duty safety switch identified for 600 V and specified without a neutral bar. The specification states that it is suitable for use as service-entrance equipment.

  • Three-Pole Fusible Switch
  • 600 V Rating
  • Outdoor Rated
  • Service-Entrance Suitability
  • No Neutral Bar
  • Interrupting Rating

Technical Specifications

Product information and specifications for the selected item.

SKU: HF365RA

Product Information

BrandSiemens
SKUHF365RA
CategoryDisconnects & Safety Switches

Key Specs

Maximum Amperage (A)400
Phase Type3 Phase
Disconnect TypeSafety Switch
NEMA Enclosure RatingNEMA 3R

Switch Ratings

Maximum Amperage (A)400
Phase Type3 Phase
I²t rating6,000,000 A²·s
Overload current rating12X
Maximum ambient temperature during operation85 °C
Short-circuit interrupting rating (AIC)10,000 AIC standard; 200,000 AIC with Class R, T, or J fuses rated 400 A maximum
Minimum ambient temperature during operation-29 °C

Disconnect Configuration

Disconnect TypeSafety Switch
FusedFused
Line/load conductor range with wire-bending space(1) 1/0 AWG–600 kcmil or (2) 1/0 AWG–500 kcmil
Line/load lug wire range(2) 1/0 AWG–750 kcmil
Fastening methodSurface
Line/load base constructionOne-piece line and load base for phase-to-phase alignment
Position indicationHighly visible ON/OFF indication
Fuse clip constructionSpring-loaded heat-sink fuse clip
Line/load lug conductor range1 conductor: 1/0 AWG–750 kcmil; or 2 conductors: 1/0 AWG–500 kcmil AWG / kcmil
Cover interlockDefeatable dual cover interlock
Lug constructionLay-in lugs
Blade visibilityWindow permits viewing of the visible blade
Line/load terminal arrangementTwo wires per lug; two lugs on each line and load end per pole
Electrical connection typeMechanical lugs
Switching actionQuick-make and break switching action

Enclosure & Certifications

NEMA Enclosure RatingNEMA 3R
Certifications and ListingsCSA Listed, UL Listed
Enclosure materialGalvanized steel
Service-entrance suitabilitySuitable for use as service entrance equipment
Enclosure thickness0.060 (16 gauge) in
Service-entrance touch protectionInternal shields meet 2020 NEC 230.62 touch-safe requirements for service entrance equipment
Tangential conduit knockout sizes2.00, 2.50, 3.00, and 3.50 in
Enclosure finishANSI Grey #61 paint

Dimensions & Weight

Height (in.)45.81
Width (in.)23.404
Length (in.)9.93
Weight (lb.)93

Product Documents

Your cart

0 products 0 units

Your cart is empty.

Add products as you browse, then review them here.