586-554-2000
Mon–Fri 6:30am–5pm · Sat 8am–3pm
586-554-2000
Mon–Fri 6:30am–5pm
The Siemens HF366NA is a 600 A, 3-pole, 600 V fused heavy-duty indoor safety switch; it is specified as suitable for service-entrance equipment and has AC and DC motor horsepower ratings.
The Siemens HF366NA is a 600 A, 3-pole, 600 V fused heavy-duty indoor safety switch; it is specified as suitable for service-entrance equipment and has AC and DC motor horsepower ratings.
The Siemens HF366NA is a 600 A, 3-pole, 600 V fused heavy-duty indoor safety switch; it is specified as suitable for service-entrance equipment and has AC and DC motor horsepower ratings.
Product information and specifications for the selected item.
| Brand | Siemens |
|---|---|
| SKU | HF366NA |
| Category | Disconnects & Safety Switches |
| Maximum Amperage (A) | 600 |
|---|---|
| Phase Type | 3 Phase |
| Disconnect Type | Safety Switch |
| NEMA Enclosure Rating | NEMA 1 |
| Maximum Amperage (A) | 600 |
|---|---|
| Phase Type | 3 Phase |
| Maximum horsepower ratings | 200 at 240 V AC; 400 at 480 V AC; 500 at 600 V AC; 50 at 250 V DC; 50 at 600 V DC hp |
| Overload current rating | 12Ă— overload current rating; exceeds the 10Ă— industry standard |
| Short-circuit rating | 10,000 standard; 200,000 with Class R, T, or J fuses rated 400 A maximum AIC |
| I²t rating | 6,000,000 A²·s |
| Disconnect Type | Safety Switch |
|---|---|
| Fused | Fused |
| Fuse clip construction | Spring-loaded heat-sink fuse clip |
| Line/load lug wire range | (2) 1/0 AWG–750 kcmil AWG/kcmil |
| Cover interlock | Defeatable dual cover interlock |
| Visual status indication | Visible blade, viewing window, and highly visible ON/OFF indication |
| Handle padlocking | Handle can be padlocked OFF with up to three padlocks using 5/16-in hasps |
| Lug wiring design | Lay-in lugs for easier wiring |
| 100% neutral wire range | (2) 1/0–600 kcmil or (2) 6–300 kcmil AWG/kcmil |
| Line/load lug conductor capacity | Lugs grip two wires per lug; two lugs at each line and load end per pole |
| Line/load conductor range with wire-bending space | (1) 1/0 AWG–600 kcmil or (2) 1/0 AWG–500 kcmil, with NEC wire-bending space AWG/kcmil |
| Neutral grounding lug | Extra ground lug on the neutral |
| Switching action | Quick-make and break switching action |
| Line/load base construction | One-piece line and load base for consistent phase-to-phase alignment |
| NEMA Enclosure Rating | NEMA 1 |
|---|---|
| Certifications and Listings | UL Listed |
| Door opening | Side-hinged door opens past 180 degrees |
| Service entrance suitability | Suitable for use as service entrance equipment |
| Service-entrance internal shielding | Internal shields meet 2020 NEC 230.62 touch-safe requirements for service entrance equipment |
| Enclosure material and finish | Cold-rolled steel, 0.060 in (16 gauge), ANSI Grey #61 paint |
| Operating ambient temperature range | Minimum -29; maximum 85 °C |
| Height (in.) | 45.81 |
|---|---|
| Width (in.) | 23.404 |
| Length (in.) | 9.93 |
| Weight (lb.) | 45.27 |
| Mounting | Surface fastening; four 0.44-in-diameter mounting holes |
| Conduit knockout layout and sizes | Tangential top-and-bottom knockouts accommodate 2.00, 2.50, 3.00, and 3.50 in conduit |
| Ground knockout | 0.50–0.75 in diameter, top and bottom |
Added to cart