Skip to content

Siemens Power Mod 125A 3-Position 4-Jaw Ring-Type Meter Stack, No Bypass

0 Reviews
SKU
WMM31125

The Siemens WMM31125 Power Mod is a residential meter stack module rated 125 A, with three positions, 4-jaw ring-type sockets, and no bypass. It is specified for 120/240 V AC, 1-phase, 3-wire incoming and outgoing service, and has a NEMA 3R galvanized-steel enclosure.

  • 125 A stack rating
  • Three meter positions
  • 120/240 V AC, 1-phase, 3-wire
  • 4-jaw ring-type sockets
  • No-bypass configuration
  • NEMA 3R enclosure

Product Overview

The Siemens WMM31125 Power Mod is a residential meter stack module rated 125 A, with three positions, 4-jaw ring-type sockets, and no bypass. It is specified for 120/240 V AC, 1-phase, 3-wire incoming and outgoing service, and has a NEMA 3R galvanized-steel enclosure.

Technical Specifications

Product information and specifications for the selected item.

SKU: WMM31125

Product Information

BrandSiemens
MPNWMM31125
SKUWMM31125
UPC / GTIN040892147322
CategoryMeter Stacks

Key Specs

Meter Stack Amperage Rating (A)125 A
NEMA Enclosure RatingNEMA 3R
Phase1
Voltage Rating120/240 V AC
Type3-Position

Electrical Ratings

Meter Stack Amperage Rating (A)125 A
Voltage Rating120/240 V AC
Phase1
AIC rating basisMaximum AIC depends on tenant-breaker AIC; approved series-rating combinations may allow higher ratings.
UL file numberE27100
System limitationNot for use on 3-phase, 4-wire delta systems
Certification standardUL-67
Main bus rating1,200 A
Maximum AIC65,000 AIC

Stack Configuration

Type3-Position
QuickRoll mounting mechanismA durable nylon wheel in the mounting bracket lets the module glide down the mounting rail
Supported tenant breaker typesQP, QPH, HQP, MP-T, MP-HT, and MP-MT
QuickConnect tightening torque400-440 lb-in
Socket torque markingsTorque values are molded on each meter socket for quick reference
Intermodule connectionSingle connection for phase, neutral, and ground, tightened with a torque-indicating nut
Suitable applicationsGarden-style, meter-rise, and high-rise applications
Center-punch locators6 locators
Mounting provisionsMounting rails and adjustable brackets
QuickBolt strap installation requirementRemove the strap before energizing
Neutral lug positionNeutral lug can be moved from below to above the cross bus
Ground lug positionGround-lug assembly can be relocated from the factory-installed bottom location to the top of the stack
Utility compliance drawingEUSERC Drawing 353

Enclosure & Material

NEMA Enclosure RatingNEMA 3R
MaterialGalvanized Steel
Intermodule sealSpring-loaded QuickBolts compress the gaskets around the QuickConnect opening to form a water-tight seal
Backplate knockout provisionsRemovable back plate with six knockouts sized 1, 1-1/4, 1-1/2, and 2 inches
Enclosure finishANSI 61 paint
Breaker coverLockable
Rain channelMovable to simplify wiring
Meter cover locking provisionBarrel-lock provisions

Dimensions & Weight

Height (in.)43.31
Width (in.)13.09
Length (in.)8.09
Weight (lb.)64.243

Product Documents

  • Multi-Family Metering Solutions: PowerMod and Uni-PAK — Selection & Application Guide Other Open / download file
  • Installation Instructions for Power Mod with QuickSystem — Modular Metering Series WB, WEB, WS, WES, WTB, WET, WMM, WMT, WML and WMK (P/N 4819950, Rev. A) Installation manual Open / download file
  • Power Mod Residential Meter Stacks Spec sheet Open / download file
  • PowerMod Meter Stack Specification Sheet — 125A, 1-Phase, 3-Position Spec sheet Open / download file
  • US2:WMM31125 Data Sheet Spec sheet Open / download file

Your cart

0 products 0 units

Your cart is empty.

Add products as you browse, then review them here.