Skip to content

Siemens Power Mod 5-Position Single-Phase Meter Stack, Ringless, 5-Jaw, No Bypass

0 Reviews
SKU
WMM51125RJ

The Siemens Power Mod WMM51125RJ is a five-position, single-phase, 3-wire meter stack for 120/240 V AC, rated 125 A at the stack and 100 A continuous per position. It has ringless 5-jaw sockets with no bypass in a galvanized-steel NEMA 3R enclosure.

  • Five Meter Positions
  • Single-Phase, 3-Wire, 120/240 V AC
  • 125 A Stack Rating
  • 100 A Continuous Current Per Position
  • Ringless 5-Jaw, No Bypass
  • NEMA 3R Galvanized-Steel Enclosure

The Siemens Power Mod WMM51125RJ is a five-position, single-phase, 3-wire meter stack for 120/240 V AC, rated 125 A at the stack and 100 A continuous per position. It has ringless 5-jaw sockets with no bypass in a galvanized-steel NEMA 3R enclosure.

Product Overview

The Siemens Power Mod WMM51125RJ is a five-position, single-phase, 3-wire meter stack for 120/240 V AC, rated 125 A at the stack and 100 A continuous per position. It has ringless 5-jaw sockets with no bypass in a galvanized-steel NEMA 3R enclosure.

  • Five Meter Positions
  • Single-Phase, 3-Wire, 120/240 V AC
  • 125 A Stack Rating
  • 100 A Continuous Current Per Position
  • Ringless 5-Jaw, No Bypass
  • NEMA 3R Galvanized-Steel Enclosure

Technical Specifications

Product information and specifications for the selected item.

SKU: WMM51125RJ

Product Information

BrandSiemens
MPNWMM51125RJ
SKUWMM51125RJ
UPC / GTIN0040892571226
CategoryMeter Stacks

Key Specs

Meter Stack Amperage Rating (A)125 A
NEMA Enclosure RatingNEMA 3R
Phase1
Voltage Rating120/240 V AC
Type5-Position 3-Wire

Electrical Ratings

Meter Stack Amperage Rating (A)125 A
Voltage Rating120/240 V AC
Phase1
Maximum AIC65 (determined by tenant-breaker AIC; approved series-rated combinations may permit higher) kA
Continuous current per position100 A
System compatibility restrictionNot for use on 3-phase, 4-wire delta systems
Thru-bus rating1200 A

Stack Configuration

Type5-Position 3-Wire
Tenant breaker provisionsQP, QPH, HQP, MP-T, MP-HT, MP-MT
Module interconnect grounding pathVia the bracket mounted in the QuickConnect opening
Line bus positionLeft
Fifth-jaw isolationCan be isolated if needed
Ground and neutral positions per stackN+1 ground positions and N neutral positions, where N is the number of meter positions
QuickConnect tightening torque400-440 (35-36 lb-ft), or until the QuickTorque indicating nut breaks off lb-in
Con Edison table listingListed in Table IV-A under the residential-use-only grouping
Cable entry directionBottom feed
Tenant Breaker CompatibilityQP, QPH, HQP, MP-T, MP-HT, MP-MT
Terminal connectionQuick Connect
QuickBolt strap requirementRemove before energizing
Neutral and ground lug placementGround lug assembly can move from the factory-bottom position to the top; neutral lug can move from below the cross bus to above it
Suitable applicationsGarden-style; meter rise; high rise

Enclosure & Material

NEMA Enclosure RatingNEMA 3R
MaterialGalvanized Steel
Rain gutterPivoting
FinishANSI 61 paint
Cutout pattern6 cutouts; sizes 1, 1-1/4, 1-1/2, and 2 in
Mounting methodMounting rails
Certificate of suitabilityUL-67
Outdoor mounting featureCenter punch dimples
Back plateRemovable

Dimensions & Weight

Weight (lb.)103.4

Product Documents

  • Multi-Family Metering Solutions: Power Mod and Uni-PAK Selection & Application Guide Other Open / download file
  • Specifications for Electric Installations — Con Edison Electric Blue Book Certification compliance Open / download file
  • Installation Instructions for Power Mod with QuickSystem — Modular Metering Series WB, WEB, WS, WES, WTB, WET, WMM, WMT, WML and WMK (P/N 4819950, Rev. C) Installation manual Open / download file
  • Data Sheet — US2:WMM51125RJ Spec sheet Open / download file

Your cart

0 products 0 units

Your cart is empty.

Add products as you browse, then review them here.