586-554-2000
Mon–Fri 6:30am–5pm · Sat 8am–3pm
586-554-2000
Mon–Fri 6:30am–5pm
The Siemens S3VA52TD is a twin-mount copper strap kit for 3VA52, 3VA61, and 3VA62 breaker frames in P5 power panels and switchboards. The bundle includes straps, cover plates, and necessary hardware; it is specified for a maximum of 250 A at 600 V AC and requires a 5-inch unit space.
The Siemens S3VA52TD is a twin-mount copper strap kit for 3VA52, 3VA61, and 3VA62 breaker frames in P5 power panels and switchboards. The bundle includes straps, cover plates, and necessary hardware; it is specified for a maximum of 250 A at 600 V AC and requires a 5-inch unit space.
The Siemens S3VA52TD is a twin-mount copper strap kit for 3VA52, 3VA61, and 3VA62 breaker frames in P5 power panels and switchboards. The bundle includes straps, cover plates, and necessary hardware; it is specified for a maximum of 250 A at 600 V AC and requires a 5-inch unit space.
Product information and specifications for the selected item.
| Brand | Siemens |
|---|---|
| MPN | S3VA52TD |
| SKU | S3VA52TD |
| UPC / GTIN | 00804766830518 |
| Category | Circuit Breakers |
| Maximum Amperage (A) | 250 |
|---|---|
| Voltage | 600 V |
| Maximum Amperage (A) | 250 |
|---|---|
| Voltage | 600 V |
| Supported system wiring | 3-phase, 3- or 4-wire; 1-phase, 2- or 3-wire only with a 3VA52 breaker |
| Series Type | 3VA |
|---|---|
| Supported panelboard/switchboard application | P5 power panels and switchboards |
| Strap material | Copper |
| 1/4-20 screw torque | 72 lb-in |
| Strap-section bus hardware torque | 50 on aluminum bus; 72 on copper bus lb-in |
| 1/4-20 fastener tightening torque | 72 lb-in |
| Existing equipment compatibility | SB1, SB2, SB3, FC20, FCI, FCII, CDP-6 and VB-6 switchboards; series 5 or 6 CDP circuit-breaker panelboards |
| Breaker orientation | Breaker ON side with bus extensions fits into the top barrier; OFF side sits between the mounting-bracket fins |
| Panel application | Distribution switchboards and Type P5 (deep) panelboards |
| Unused unit-space closure requirement | A blank filler plate is needed if the kit does not completely fill the unit space of a removed branch module. |
| Bundle/Single | Bundle |
|---|---|
| Included component types | Straps, cover plates, and necessary hardware |
| Weight (lb.) | 20 |
|---|---|
| Required empty unit space | 5 in |
| Minimum switchboard section width | 32 in |
Added to cart